参数资料
型号: LWN1601-6ED1FK2G
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: DC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT
文件页数: 3/28页
文件大小: 1316K
代理商: LWN1601-6ED1FK2G
BCD20020-G REV AA
Page 11 of 28
www.power-one.com
W Series Data Sheet
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
Parallel Operation
Double-output models exhibit an independant
control logic each. Both outputs can be
connected in parallel, provided that the
options S (included in M1) and R are not used,
since they influence only the 2nd output. The
two power trains share the current due to their
output voltage droop characteristic.
Up to 3 converters with the same output
voltage may be operated in parallel. It is
possible to parallel W Series with X Series
converters.
Reasonable current sharing is achieved by
the droop characteristic. Correct mode of
operation is highly dependent upon the wiring
of the converters and the impedance of these
wires. Use wires with equal length and equal
cross sections of min. 1.5 mm 2. The best
results for parallel operation can be achieved
with the wiring shown in fig. 6.
Parallel operation of single-output models
using option R (output voltage adjust) is
possible, but not recommended. Refer to fig.
6; the connections between the pins 8 and 9
(both Vo–) should be as short as possible.
Note: Parallel operation is not possible, if the
temperature sensor is connected, as the sensor
eliminates the output voltage droop.
Series Connection
Series connection of several outputs up to 150
V is possible. Exceeding an output voltage of
60 V, the output is not SELV.
Output Characteristic and Protection
The output characteristic, individual for each
powertrain, is rectangular with a droop to ease
parallel operation; see fig. 7.
However, a 50% higher output current is
possible for a short time, such allowing start-
up of loads or charging of capacitors; see fig.
8.
Each
output
is
independently
protected
against internal overvoltage by means of a
second control loop. When the output voltage
exceeds
Vo L,
the
respective
output
is
disabled.
Overtemperature Protection
A built-in temperature sensor protects each powertrain is
independently protected against overtemperature. When a
certain temperature is reached, the concerned powertrain
reduces its output power continuously.
Fig. 7
Vo versus Io (single-output model, typical values).
Vo+ 2
Vo+ 3
Vo- 4
Vo- 5
Vo- 8
Vo- 9
Vo+ 6
Vo+ 7
AUX 10
Vo+ 2
Vo+ 3
Vo- 4
Vo- 5
Vo- 8
Vo- 9
Vo+ 6
Vo+ 7
AUX 10
Vo+ 2
Vo+ 3
Vo- 4
Vo- 5
Vo- 8
Vo- 9
Vo+ 6
Vo+ 7
AUX 10
V
i
V
i
V
i
Load
11054b
Additional wiring for output currents
I
o ≥ 10 A
Additional wiring, if using the R-input
V
R
+
_
Fig. 6
Wiring for single-output converters connected in parallel. Additional wiring
for higher output currents and with the use of option R is shown.
0.8
1.0
0.6
0.4
0.2
0
0.2
0.4
0.6
0.8
1.0
1.2
I
o /Io nom
V
o /Vo nom
05181a
相关PDF资料
PDF描述
LFC15SP 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE
LS5540-7EPD1TB1 2-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
LS5540-7EPD8TB1 2-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
LK2660-7ERD3TB1 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
LZ9FD34 SPECIALTY ANALOG CIRCUIT, PQFP48
相关代理商/技术参数
参数描述
LWN1601-6EG 制造商:Power-One 功能描述:DIN RAIL 247W 24.7V
LWN1601-6E-G 功能描述:DC/DC转换器 250W W-DIN-Rail Converters SNGL OUT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
LWN1601-6EK2 制造商:Power-One 功能描述:AC/DC Power Supply Single-OUT 24.7V 10A 247W 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 24.7V 10A 250W 5PIN - Bulk
LWN1601-6EM1FK2 制造商:Power-One 功能描述:- Bulk
LWN16016ER 制造商:Power-One 功能描述: