- 您现在的位置：买卖IC网 > PDF目录80031 > LWN2660-6ERD2M1FK2G (POWER-ONE INC) 2-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LWN2660-6ERD2M1FK2G |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-5 |
| 文件页数： | 4/25页 |
| 文件大小： | 758K |
| 代理商： | LWN2660-6ERD2M1FK2G |
BCD20020-G Rev AB1, 17-Nov-09
Page 12 of 25
www.power-one.com
W Series Data Sheet
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
Fig. 9
Trickle charge voltage versus temperature for different
temperature coefficients (Vo safe with disconnected sensor)
Fig. 10
Schematic circuit diagram of a system with battery backup
and temperature-controlled charging.
Fig. 8
Short term peak power characteristic: overcurrent versus
time (typical values).
certain temperature is reached, the concerned powertrain
reduces its output power continuously.
Thermal Considerations
The thermal conditions are influenced by input voltage, output
current, airflow, and temperature of surrounding components.
TA max is therefore, contrary to TC max, an indicative value only.
Caution: The installer must ensure that under all operating
conditions TC remains within the limits stated in the table
Temperature specifications.
Note: Sufficient forced cooling allows TA to be higher than TA max
provided that TC max is not exceeded. It is recommended that
continuous operation under worst case conditions of the
following 3 parameters be avoided: Minimum input voltage,
maximum output power, and maximum temperature.
Battery Charging and Temperature Sensor
The battery charger models exhibit the option M1 and have
been designed to charge lead-acid batteries. The R-input
allows for connecting a battery-specific temperature sensor,
which provides temperature controlled adjust of the trickle
charge voltage. This optimizes charging as well as battery life
time. Depending upon the cell voltage and the temperature
coefficient of the battery, different sensor types are available;
see Accessories.
Note: Parallel operation is not possible, if the temperature sensor
is connected to the paralleled outputs Vo+, as the sensor
eliminates the output voltage droop.
However, it is possible to insert bleeding resistors in the Vo+
output lines of each converter in order to create a droop of approx.
0.6 V @ Io nom for 24 V outputs (1.2 V @ Io nom for 48V outputs), but
this creates considerable power losses.
1.4
1.6
1.2
1.0
0.8
0.6
-- 0.5
0.5
1.5
2.5 s
I
o / Io nom
05194b
0
1
2
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.45
Cell voltage [V]
–20
–10
0
10
20
30
40
50 °C
06139b
V
C = 2.27 V, –3 mV/K
V
C = 2.27 V, –3.5 mV/K
V
C = 2.23 V, –3 mV/K
V
C = 2.23 V, –3.5 mV/K
V
o safe
Power
supply
Load
–
+
Input
Vo–
R
Temperature sensor
03099d
Battery
Vo+
+
相关PDF资料 |
PDF描述 |
|---|---|
| LM385BZ-1.2RB | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.235 V, PBCY3 |
| LM4041CIM-ADJT&R | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.233 V, PDSO8 |
| LRE48D | 2-OUTPUT 4 W DC-DC REG PWR SUPPLY MODULE |
| LH1601-2RD4 | 1-OUTPUT 70 W AC-DC REG PWR SUPPLY MODULE |
| LK5540-7ERD1TB1 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LWN2880-6 | 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 49.36V 5A 250W 5PIN - Bulk |
| LWN2880-6E | 功能描述:DC/DC转换器 DIN Rail 247W (2x 49.4V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LWN28806ED2F | 制造商:Power-One 功能描述: |
| LWN2880-6EG | 制造商:Power-One 功能描述:DIN RAIL 247W 2X 49.4V |
| LWN2880-6E-G | 功能描述:DC/DC转换器 250W W-DIN-Rail Converters DUAL OUT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。