参数资料
型号: LWN2880-6ERD2M1FK2G
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT PACKAGE-5
文件页数: 11/25页
文件大小: 758K
代理商: LWN2880-6ERD2M1FK2G
BCD20020-G Rev AB1, 17-Nov-09
Page 19 of 25
www.power-one.com
W Series Data Sheet
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
1
2
3
10074
Fig. 19
Cage clamp terminals. Use 0.5 to 2.5 mm2 (AWG 20 to 12)
solid or stranded wires depending on local requirements.
This fuse is designed to break an overcurrent in case of a
malfunction of the converter and is not customer-accessible.
External fuses in the wiring to one or both input lines (L
and/
or N ) may be necessary to ensure compliance with local
requirements. A built-in second fuse in the neutral path is
available as option F.
A second fuse in the wiring to the neutral terminal N
or option
F is needed if:
Local requirements demand an individual fuse in each
source line
Neutral and earth impedance is high or undefined
Phase and neutral of the mains are not defined or cannot be
assigned to the corresponding terminals (L
to phase and
N
to neutral).
Models with Option F: Caution! Double-pole/neutral fusing.
If the converters operate at source voltages above 250 VDC,
an external fuse or a circuit breaker at system level should be
installed.
Caution:
Installation must strictly follow the national safety regulations.
Do not open this apparatus!
Protection Degree
The protection degree of the converters is IP 20. Protective
covers over input and output terminals are available on
request; see Accessories.
Cleaning Agents
Any penetration of liquid or foreign solid objects is to be
prevented, since the converters are not hermetically sealed.
Standards and Approvals
The converters of the LW Series with feature E were approved
according to IEC/EN 60950-1:2001 (IEC/EN 60950 for models
without E), IEC 61010-1:C11:2002 (models without E: IEC
61010-1), and EN 50178:1997 (with and without E).
The converters are UL508-listed and approved according to
UL 60950-1 and CAN/CSA C22.2 No. 60950-1.
Safety approvals for EW models are in process.
The converters have been designed in accordance with said
standards for:
Class I equipment
Power supply for building-in, vertical mounting on 35 mm
DIN-rail or on a wall
Overvoltage category II (III for 110 VAC supply)
Basic insulation between input and case, based on
250 VAC
Double or reinforced insulation between input and output,
based on 250 VAC and 350 VDC.
Functional insulation between outputs and case.
Functional insulation between outputs.
Pollution degree 3 environment (AC-input) and degree 2
(DC input).
The converters are subject to manufacturing surveillance in
accordance with the above mentioned UL standards and with
ISO9001:2000.
Railway Applications
The W Series converters have been designed observing the
railway standards EN 50155 and EN 50121. All boards are
coated with a protective lacquer.
The EW Series is particularily suitable for connection to 110 V
railway batteries.
相关PDF资料
PDF描述
LWN2320-6ERD5M1FK2G 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
LM4040BIZ-5.0T&R 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 5 V, PBCY3
LT1076ET 2 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PZFM5
LT1076HVET 2 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PZFM5
LRA9S 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LWN600A-ANTK 制造商:Black Box Corporation 功能描述:SmartPath 602HA Antenna Kit
LWN600A-ANTK-W1 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR LWN600A-ANTK
LWN600A-ANTK-W3 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR LWN600A-ANTK
LWN600A-BKT 制造商:Black Box Corporation 功能描述:SmartPath 602HA Mounting Bracket
LWN600A-BKT-W1 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR LWN600A-BKT