- 您现在的位置：买卖IC网 > PDF目录80307 > LWN2880-6ERD2M2FK2G (POWER-ONE INC) 2-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LWN2880-6ERD2M2FK2G |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-5 |
| 文件页数： | 13/25页 |
| 文件大小： | 758K |
| 代理商： | LWN2880-6ERD2M2FK2G |
BCD20020-G Rev AB1, 17-Nov-09
Page 20 of 25
www.power-one.com
W Series Data Sheet
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
Isolation
The electric strength test is performed in the factory as routine
test in accordance with EN 50116 and IEC/EN 60950 and
should not be repeated in the field. Power-One will not honor
any warranty claims resulting from electric strength field tests.
Leakage Currents in AC-DC Operation
Leakage currents flow due to internal leakage capacitance and
RFI
suppression Y-capacitors. The
current
values
are
proportional to the mains voltage and nearly proportional to the
mains frequency. They are specified at maximum operating
input voltage where phase, neutral, and protective earth are
correctly connected as required for class I equipment.
Leakage current may exceed 3.5 mA, if fi > 63 Hz.
Safety of Operator-Accessible Output Circuits
If the output circuit of a converter is operator accessible, it shall
be a SELV circuit according to IEC/EN 60950 related safety
standards.
The converters have SELV output circuits up to an output
voltage of 57.5 V. However, if the isolated outputs are
connected to another voltage source or connected in series
with a total of >57.5 V the outputs are hazardous.
It is the sole responsibility of the installer to ensure the
compliance
with
the
relevant
and
applicable
safety
regulations.
LED Indicator
A green LED is activated, when the output voltage Vo is within
the normal operating tolerance band.
Note: This LED is also activated, when the converter is not
powered by the input, but a loaded battery is connected to the
output.
Table 14: Isolation
Characteristic
Input to case
Output(s) to
Output 1 to
Unit
and output(s)
case
output 2 and AUX
Electric
Factory test
≥1 s
2.8 1
1.4
0.5
kVDC
strength
AC test voltage equivalent
2.0
1.0
0.35
kVAC
test
to factory test
Insulation resistance
>300 2
>100
M
1
In accordance with EN 50116 and IEC/EN 60950-1, subassemblies are pretested with 4.2 kVDC.
2
Tested at 500 VDC.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4000IGN#TRPBF | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO28 |
| LTC4155EUFD#TRPBF | POWER SUPPLY SUPPORT CKT, PQCC28 |
| LM4040BIZ-5.0AMMOPACK | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 5 V, PBCY3 |
| L296VH | 4 A SWITCHING REGULATOR, 200 kHz SWITCHING FREQ-MAX, PZFM15 |
| LM9140BYM-2.5 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.5 V, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LWN600A-ANTK | 制造商:Black Box Corporation 功能描述:SmartPath 602HA Antenna Kit |
| LWN600A-ANTK-W1 | 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR LWN600A-ANTK |
| LWN600A-ANTK-W3 | 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR LWN600A-ANTK |
| LWN600A-BKT | 制造商:Black Box Corporation 功能描述:SmartPath 602HA Mounting Bracket |
| LWN600A-BKT-W1 | 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR LWN600A-BKT |
发布紧急采购，3分钟左右您将得到回复。