- 您现在的位置：买卖IC网 > Datasheet目录88 > M0116SD-161SDBR1-1 (Newhaven Display Intl)MODULE VF CHAR 1X16 5.29MM Datasheet资料下载
参数资料
| 型号： | M0116SD-161SDBR1-1 |
| 厂商： | Newhaven Display Intl |
| 文件页数： | 14/22页 |
| 文件大小： | 1227K |
| 描述： | MODULE VF CHAR 1X16 5.29MM |
| 标准包装： | 50 |
| 外形L x W x H： | 80.00mm x 36.00mm x 11.00mm |
| 可视范围： | 51.50mm L x 5.29mm W |
| 显示格式： | 16 x 1 |
| 显示器类型： | 字符 |
| 格式： | 5 x 8 点 |
| 电源电压： | 5V |
| 字符尺寸： | 5.29mm H x 2.80mm W |
| 工作温度： | -20°C ~ 70°C |
| 产品目录页面： | 2848 (CN2011-ZH PDF) |
DOCUMENT NO. REV.NO PAGE
STANDARD
NAME
SPECIFICATION FOR APPROVAL
00 21/22
Note: The address counter (ACC) is automatically incremented or decremented by 1 after the write
instructions to CG-RAM or DD-RAM are executed. The RAM data selected by the ACC cannot
be read out at this time even if read instructions are executed. Therefore, to correctly read data,
execute either the address set instruction or cursor shift instruction (only with DD-RAM), then
just before reading the desired data, execute the read instruction from the second time the read
instruction is sent.
7. 0 PERATING RECOMMENDATIONS
7.1 Avoid applying excessive shock or vibration beyond the specification for the VFD module.
7.2 Since VFDs are made of glass material, careful handling is required.
i.e. Direct impact with hard material to the glass
surface (especially exhaust tip) may crack the
glass.
7.3 When mounting the VFD module to your system, leave a slight gap between the VFD glass and
your front panel. The module should be mounted without stress to avoid flexing of the PCB.
7.4 Avoid plugging or unplugging the interface connection with the power on, otherwise it may cause
the severe damage to input circuitry.
7.5 Slow starting power supply may cause non-operation because one chip Mico won’t be reset.
7.6
Exceeding any of maximum ratings may cause the permanent damage.
7.7 Since the VFD modules contain high voltage source, careful handing is required during
powered on.
7.8 When the power is turned off, the capacitor dose not discharge immediately.
The high voltage applied to the VFD must not contact to the ICs. And the short-circuit
of mounted components on PCB within 30 times the specified current consumption when the
power is turned on.
7.9 The power supply must be capable of providing at least 3 times the rated current, because the
surge current can be more than 3 times the specified current consumption when the power is
turned on.
7.10
Avoid using the module where excessive noise interference is expected. Noise may affects the
Interface signal and causes improper operation. And it is important to keep the length of the
interface cable less than 50cm.
7.11 Since all VFD modules contain C-MOS ICs, anti-static handing procedures are always required.
NOTE: Newhaven Display reserves the right to change or modify this spec or design without notice in
order to improve the quality or design of this product.
相关PDF资料 |
PDF描述 |
|---|---|
| M0116SD-161SDBR1-S | MODULE VF CHAR 1X16 5.1MM |
| M0116SY-161MSAR1-C | MODULE VF CHAR 1X16 5MM |
| M0116SY-161MSAR1-S2C | MODULE VFD CHAR 1X16 5.00MM |
| M0116SY-161MSAR1-S2 | MODULE VFD CHAR 1X16 5.00MM |
| M0116SY-161MSAR1 | MODULE VF CHAR 1X16 5MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M0116SD-161SDBR1-S | 功能描述:真空荧光显示器 - VFD DIM=100.0x28.0x22.0 5 x 7 Dot RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
| M0116SY-161MSAR1 | 功能描述:真空荧光显示器 - VFD DIM=125.0x35.5x18.0 14- Seg Dot RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
| M0116SY-161MSAR1-C | 功能描述:真空荧光显示器 - VFD 1 x 16 125.0 x 35.5 x 18.0 RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
| M0116SY-161MSAR1-S2 | 功能描述:真空荧光显示器 - VFD VFD Dot Matrix 125.0 x 35.5 x 18.0 RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
| M0116SY-161MSAR1-S2C | 功能描述:真空荧光显示器 - VFD VFD Dot Matrix 125.0 x 35.5 x 18.0 RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
发布紧急采购，3分钟左右您将得到回复。