- 您现在的位置：买卖IC网 > Datasheet目录88 > M0216SD-162SDAR2-1 (Newhaven Display Intl)MODULE VF CHAR 2X16 5.34MM Datasheet资料下载
参数资料
| 型号： | M0216SD-162SDAR2-1 |
| 厂商： | Newhaven Display Intl |
| 文件页数： | 5/24页 |
| 文件大小： | 1228K |
| 描述： | MODULE VF CHAR 2X16 5.34MM |
| 产品培训模块： | Serial LCD Displays |
| 标准包装： | 50 |
| 外形L x W x H： | 80.00mm x 36.00mm x 18.00mm |
| 可视范围： | 51.80mm L x 11.50mm W |
| 显示格式： | 16 x 2 |
| 显示器类型： | 字符 |
| 格式： | 5 x 8 点 |
| 电源电压： | 5V |
| 字符尺寸： | 5.34mm H x 2.10mm W |
| 工作温度： | -40°C ~ 85°C |
| 产品目录页面： | 2848 (CN2011-ZH PDF) |
STANDARD
NAME
4.1.2 INTEL I80-TYPE MODE
This mode uses the Read (RD/) and Write (WR/) control signals to transfer information.
Instructions/data are written to the modules on the rising edge of WR/ and are read from the modules
after the falling edge of RD/.
WR/
RD/
DB7
IB7
IB7
BF='0'
DB7
IB6
IB6
IB6
DB6
DB6
IB0
IB0
IB0
DB0
DB0
Write instruction
Write instruction
Read instruction
Write data
RS
Figure 10.
Typical 8-Bit Parallel Interface Sequence Using I80-Type Mode
4.2 SYNCHRONOUS SERIAL INTERFACE MODE
In the synchronous serial interface mode, instructions and data are sent between the host and the
modules using 8-bit bytes. Two bytes are required per read/write cycle and are transmitted MSB first.
The start byte contains 5 high bits, the Read/Write (R/W) control bit, the Register Select (RS) control
bit, and a low bit. The following byte contains the instruction/data bits. The R/W bit determines
whether the cycle is a read (high) or a write (low) cycle. The RS bit is used to identify the second byte
as an instruction (low) or data (high).
This mode uses the Strobe (STB) control signal, Serial Clock (SCK) input, and Serial I/O (SI/SO) line
to transfer information. In a write cycle, bits are clocked into the modules on the rising edge of SCK.
In a read cycle, bits in the start byte are clocked into the modules on the rising edge of SCK. After the
minimum wait time, each bit in the instruction/data byte can be read from the modules after each falling
edge of SCK. Each read/write cycle begins on the falling edge of STB and ends on the rising edge. To
be a valid read/write cycle, the STB must go high at the end of the cycle.
PAGE
13/24
REV. NO.
DOCUMENT NO.
03
相关PDF资料 |
PDF描述 |
|---|---|
| M0216SD-162SDAR8 | MODULE VF CHAR 2X16 5.34MM |
| M0220MD-202LDAR2 | MODULE VF CHAR 2X20 10.5MM |
| M0220MD-202MDAR1-1 | MODULE VF CHAR 2X20 8.95MM |
| M0220MD-202MDAR1-3 | MODULE VF CHAR 2X20 8.95MM |
| M0220SD-202SDAR1-1G | MODULE VF CHAR 2X20 5.34MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M0216SD-162SDAR8 | 功能描述:真空荧光显示器 - VFD 2 x 16 84.0 x 44.0 x 16.6 RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
| M02170G-12 | 制造商:Mindspeed Technologies Inc 功能描述:10 GBPS LASER DRIVER - Bulk |
| M02171G-12 | 制造商:Mindspeed Technologies Inc 功能描述:M02171G-12 10GBPS LD W/DDMI ROHS-IC - Bulk |
| M02172G-12 | 制造商:Mindspeed Technologies Inc 功能描述:M02172G-12 10GBPS LD W/DDMI ROHS-IC - Bulk |
| M0220MD-202LDAR2 | 功能描述:真空荧光显示器 - VFD DIM=193.0x64.0x25.0 5 x 7 Dot RoHS:否 制造商:Noritake 产品:Graphic Display Modules 字符计数 x 行: 模块大小 - 宽x高x厚:230 mm x 78 mm x 15 mm 观察区域 - 宽x高:166.25 mm x 41.45 mm 接口: 电压额定值:5 V 工作温度范围:- 40 C to + 85 C 封装: |
发布紧急采购，3分钟左右您将得到回复。