- 您现在的位置：买卖IC网 > PDF目录39439 > M0790YH200 (WESTCODE SEMICONDUCTORS LTD) 790 A, 2000 V, SILICON, RECTIFIER DIODE PDF资料下载
参数资料
| 型号： | M0790YH200 |
| 厂商： | WESTCODE SEMICONDUCTORS LTD |
| 元件分类： | 整流器 |
| 英文描述： | 790 A, 2000 V, SILICON, RECTIFIER DIODE |
| 文件页数： | 6/11页 |
| 文件大小： | 415K |
| 代理商： | M0790YH200 |
WESTCODE
WESTCODE An IXYS Company
Fast Recovery Diode Types M0790Y#200 to M0790Y#250
Data Sheet. Types M0790Y#200 to M0790Y#250 Issue 1
Page 4 of 11
February, 2004
[]
thJK
MAX
J
SINK
R
f
k
E
T
+
=
)
(
5.0 Reverse Recovery Loss
The following procedure is recommended for use where it is necessary to include reverse recovery loss.
From waveforms of recovery current obtained from a high frequency shunt (see Note 1) and reverse
voltage present during recovery, an instantaneous reverse recovery loss waveform must be constructed.
Let the area under this waveform be E joules per pulse. A new sink temperature can then be evaluated
from:
Where k = 0.2314 (°C/W)/s
E = Area under reverse loss waveform per pulse in joules (W.s.)
f = Rated frequency in Hz at the original sink temperature.
RthJK = d.c. thermal resistance (°C/W)
The total dissipation is now given by:
f
E
W
original
tot
+
=
)
(
)
(
NOTE 1 - Reverse Recovery Loss by Measurement
This device has a low reverse recovered charge and peak reverse recovery current. When measuring the
charge, care must be taken to ensure that:
(a) AC coupled devices such as current transformers are not affected by prior passage of high
amplitude forward current.
(b) A suitable, polarised, clipping circuit must be connected to the input of the measuring oscilloscope
to avoid overloading the internal amplifiers by the relatively high amplitude forward current signal.
(c) Measurement of reverse recovery waveform should be carried out with an appropriate critically
damped snubber, connected across diode anode to cathode. The formula used for the calculation of this
snubber is shown below:
dt
di
S
r
C
V
R
= 4
2
Where:
Vr = Commutating source voltage
CS = Snubber capacitance
R = Snubber resistance
6.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
相关PDF资料 |
PDF描述 |
|---|---|
| M1.5KE22CTR | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| MA1.5KE18CTRE3 | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| MA1.5KE22CE3 | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| MA1.5KE24CTR | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| MA1.5KE51C | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M08 | 制造商:GAMEWELL-FCI 制造商全称:GAMEWELL-FCI 功能描述:Mini-Annunciators Back-Lit |
| M080 | 制造商:Kemo Electronic 功能描述:6~12V Flasher |
| M0800.0010 | 功能描述:断路器附件 IP54 Cover RoHS:否 制造商:Phoenix Contact 产品:Base Elements |
| M0800.0020 | 功能描述:断路器附件 IP54 Cover w/ key RoHS:否 制造商:Phoenix Contact 产品:Base Elements |
| M08001 | 制造商:CYBER DYMICS / MITIGATOR 功能描述: 制造商:CYBERD 功能描述: |
发布紧急采购，3分钟左右您将得到回复。