- 您现在的位置：买卖IC网 > PDF目录296334 > M0872LC210 (WESTCODE SEMICONDUCTORS LTD) 872 A, 2100 V, SILICON, RECTIFIER DIODE PDF资料下载
参数资料
| 型号： | M0872LC210 |
| 厂商： | WESTCODE SEMICONDUCTORS LTD |
| 元件分类： | 参考电压二极管 |
| 英文描述： | 872 A, 2100 V, SILICON, RECTIFIER DIODE |
| 文件页数： | 6/11页 |
| 文件大小： | 375K |
| 代理商： | M0872LC210 |
WESTCODE
WESTCODE An IXYS Company
Soft Recovery Diode Type M0872LC140 to M0872LC210
Data Sheet. Types M0872LC140 to M0872LC210 Issue 1
Page 4 of 11
March, 2004
5.0 Reverse Recovery Loss
The following procedure is recommended for use where it is necessary to include reverse recovery loss.
From waveforms of recovery current obtained from a high frequency shunt (see Note 1) and reverse
voltage present during recovery, an instantaneous reverse recovery loss waveform must be constructed.
Let the area under this waveform be E joules per pulse. A new sink temperature can then be evaluated
from:
[]
thJK
MAX
j
SINK
R
f
k
E
T
+
=
)
(
Where k = 0.2314 (°C/W)/s
E = Area under reverse loss waveform per pulse in joules (W.s.)
f = Rated frequency in Hz at the original sink temperature.
Rth(JK) = d.c. thermal resistance (°C/W)
The total dissipation is now given by:
f
E
W
original
tot
+
=
)
(
)
(
NOTE 1 - Reverse Recovery Loss by Measurement
This device has a low reverse recovered charge and peak reverse recovery current. When measuring the
charge, care must be taken to ensure that:
(a) AC coupled devices such as current transformers are not affected by prior passage of high
amplitude forward current.
(b) A suitable, polarised, clipping circuit must be connected to the input of the measuring oscilloscope
to avoid overloading the internal amplifiers by the relatively high amplitude forward current signal.
(c) Measurement of reverse recovery waveform should be carried out with an appropriate critically
damped snubber, connected across diode anode to cathode. The formula used for the calculation of this
snubber is shown below:
dt
di
S
r
C
V
R
= 4
2
Where:
Vr = Commutating source voltage
CS = Snubber capacitance
R = Snubber resistance
6.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
相关PDF资料 |
PDF描述 |
|---|---|
| M0914LC220 | 914 A, 2200 V, SILICON, RECTIFIER DIODE |
| M0S6020-153MXC | 1 ELEMENT, 15 uH, GENERAL PURPOSE INDUCTOR, SMD |
| MSS6122-622MXD | 1 ELEMENT, 6.2 uH, GENERAL PURPOSE INDUCTOR, SMD |
| MSS6122-542MXD | 1 ELEMENT, 5.4 uH, GENERAL PURPOSE INDUCTOR, SMD |
| M111PCSX | GENERAL PURPOSE AUDIO CONNECTOR, JACK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M0873 | 制造商:Tamura Corporation of America 功能描述: |
| M0885SCA129 | 制造商:n/a 功能描述:Ships in 2 days |
| M08886G-13 | 制造商:Mindspeed Technologies Inc 功能描述:TRI-COLOR LED/LASER DRIVER FOR LCD/LCOS - Bulk |
| M08888G-11 | 功能描述:Laser Driver IC 3 Channel 3.3V 28-QFN (4.5x4.5) 制造商:m/a-com technology solutions 系列:- 包装:托盘 零件状态:有效 类型:激光二极管驱动器 数据速率:- 通道数:3 电压 - 电源:3.3V 电流 - 电源:7.5mA 电流 - 调制:- 电流 - 偏置:- 工作温度:-40°C ~ 85°C 封装/外壳:28-VFQFN 裸露焊盘 供应商器件封装:28-QFN (4.5x4.5） 安装类型:表面贴装 标准包装:576 |
| M08889G-13 | 制造商:Mindspeed Technologies Inc 功能描述:3 CHL LED DRIVER WITH INTEG DC-DC CONV - Bulk |
发布紧急采购，3分钟左右您将得到回复。