参数资料
型号: M30102F3FP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP48
封装: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数: 2/164页
文件大小: 3302K
代理商: M30102F3FP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Memory
9
Operation of Functional Blocks
The M30100/M30102 contain the following devices on a single chip: ROM and RAM, which function as
memory for storing instructions and data; a central processing unit (CPU) that executes operations; and
peripheral devices, such as timers, serial I/O, an A-D converter, an D-A converter, and I/O ports.
The individual devices are described below.
Memory
Figure 1.3.1 is a memory map. The address space extends the 1M bytes from address 0000016 to
FFFFF16. From FFFFF16 down is ROM. For example, in the M30100M2-XXXFP, there is 16K bytes of
internal ROM from FC00016 to FFFFF16. The vector table for fixed interrupts such as the reset are mapped
to FFFDC16 to FFFFF16. The starting address of the interrupt routine is stored here. The address of the
vector table for timer interrupts, etc., can be set as desired using the internal register (INTB). See the
section on interrupts for details.
From 0040016 up is RAM. For example, in the M30100M2-XXXFP, there is 1K byte of internal RAM from
0040016 to 007FF16. In addition to storing data, the RAM also stores the stack used when calling subrou-
tines and when interrupts are generated.
The SFR area is mapped to 0000016 to 000FF16. This area accommodates the control registers for periph-
eral devices such as I/O ports, A-D converter, serial I/O, and timers, etc. Any part of the SFR area that is not
occupied is reserved and cannot be used for other purposes.
The special page vector table is mapped to FFE0016 to FFFDB16. If the starting addresses of subroutines
or the destination addresses of jumps are stored here, subroutine call instructions and jump instructions
can be used as 2-byte instructions, reducing the number of program steps.
Figure 1.3.1. Memory map
0000016
XXXXX16
FFFFF16
0040016
YYYYY16
Internal ROM area
SFR area
(For details, see
Figures 1.6.1 and
1.6.2)
Internal RAM area
FFE0016
FFFDC16
FFFFF16
Undefined instruction
Overflow
BRK instruction
Address match
Single step
Watchdog timer
Reset
Special page
vector table
DBC
XXXXX16
M30100M2/M2T
M30102M2/M2T
YYYYY16
FC00016
007FF16
M30100M3/M3T/F3/F3T
M30102M3/M3T/F3/F3T
M30102M6
/M6T
Internal RAM area
Internal ROM area
Memory size
007FF16
00DFF16
FA00016
F400016
1K byte
2.5K byte
16K byte
24K byte
48K byte
Type No.
Memory size
相关PDF资料
PDF描述
M30102M6-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M37221M6-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M35045-002FP 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDSO20
MPC5604BEMMG 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, BGA208
MPC5604BEVLQR 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS