收藏本站
参数资料
型号： M30102M6-XXXFP
元件分类： 微控制器/微处理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
封装： 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数： 18/164页
文件大小： 3302K
代理商： M30102M6-XXXFP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
A-D Converter
113
A-D control register 0 (Note 1)
Symbol
Address
When reset
ADCON0
00D616
00000XXX2
b7
b6
b5
b4 b3
b2
b1
b0
Analog input pin select bit
0 0 0 : AN0 is selected
0 0 1 : AN1 is selected
0 1 0 : AN2 is selected
0 1 1 : AN3 is selected
1 0 0 : AN4, AN8 is selected
1 0 1 : AN5, AN9 is selected
1 1 0 : AN6, AN10 is selected
1 1 1 : AN7, AN11 is selected
CH0
Bit symbol
Bit name
Function
CH1
CH2
A-D operation mode
select bit 0
0 : One-shot mode
1 : Repeat mode
MD0
ADGSEL0
ADST
A-D conversion start flag
0 : A-D conversion disabled
1 : A-D conversion started
Frequency select bit 0
0 : fAD/4 is selected
1 : fAD/2 is selected
CKS0
W
R
A-D control register 1 (Note 1)
Symbol
Address
When reset
ADCON1
00D716
0016
Bit name
Function
Bit symbol
b7
b6
b5
b4
b3 b2
b1
b0
OPA0
OPA1
External op-amp
connection mode bit
W
R
b2 b1 b0
0 0 : ANEX0 and ANEX1 are not used
0 1 : ANEX0 input is A-D converted
1 0 : ANEX1 input is A-D converted
1 1 : External op-amp connection mode
b7 b6
Note 1: If the A-D control register is rewritten during A-D conversion, the conversion result is
indeterminate.
Note 2: When changing A-D operation mode, set analog input pin again.
Note 3: AN4 to AN7 and AN8 to AN11 are selected by the A-D input group select bit.
Note 1: If the A-D control register is rewritten during A-D conversion, the conversion result is
indeterminate.
Note 2: In repeat mode, only 8-bit mode can be used.
Note 3: When f(XIN) is over 10 MHz, the
φAD frequency must be under 10 MHz by dividing.
BITS
8/10-bit mode select bit 0 : 8-bit mode
1 : 10-bit mode
VCUT
Vref connect bit
0 : Vref not connected
1 : Vref connected
Frequency select bit 1
0 : fAD/2 or fAD/4 is selected
1 : fAD is selected
CKS1
0
Set this bit to “0”.
0
Set this bit to “0”. When read, their values are “0”.
(Note 2)
(Note 2, 3)
A-D input group select bit
0 : Port P0 group is selected
1 : Port P1 group is selected
0
(Note 2)
(Note 3)
Figure 1.16.2. A-D converter-related registers (1)
相关PDF资料
PDF描述
M37221M6-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M35045-002FP 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDSO20
MPC5604BEMMG 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, BGA208
MPC5604BEVLQR 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP144
MPC5604BEVLQ 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*