参数资料
型号: M34513M8-XXXFP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, MROM, 4.2 MHz, MICROCONTROLLER, PQFP32
封装: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件页数: 50/96页
文件大小: 1078K
代理商: M34513M8-XXXFP
54
4513/4514 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
Table 22 Key-on wakeup control register, pull-up control register, and interrupt control register
K03
K02
K01
K00
Key-on wakeup control register K0
PU03
PU02
PU01
PU00
Key-on wakeup not used
Key-on wakeup used
Key-on wakeup not used
Key-on wakeup used
Key-on wakeup not used
Key-on wakeup used
Key-on wakeup not used
Key-on wakeup used
Pins P12 and P13 key-on wakeup
control bit
Pins P10 and P11 key-on wakeup
control bit
Pins P02 and P03 key-on wakeup
control bit
Pins P00 and P01 key-on wakeup
control bit
at reset : 00002
at RAM back-up : state retained
0
1
0
1
0
1
0
1
Pull-up transistor OFF
Pull-up transistor ON
Pull-up transistor OFF
Pull-up transistor ON
Pull-up transistor OFF
Pull-up transistor ON
Pull-up transistor OFF
Pull-up transistor ON
Pins P12 and P13 pull-up transistor
control bit
Pins P10 and P11 pull-up transistor
control bit
Pins P02 and P03 pull-up transistor
control bit
Pins P00 and P01 pull-up transistor
control bit
R/W
Pull-up control register PU0
at reset : 00002
at RAM back-up : state retained
0
1
0
1
0
1
0
1
R/W
I13
I12
I11
I10
I23
I22
I21
I20
Not used
Interrupt valid waveform for INT0 pin/
return level selection bit (Note 2)
INT0 pin edge detection circuit control bit
INT0 pin
timer 1 control enable bit
This bit has no function, but read/write is enabled.
Falling waveform (“L” level of INT1 pin is recognized with the SNZI1
instruction)/“L” level
Rising waveform (“H” level of INT1 pin is recognized with the SNZI1
instruction)/“H” level
One-sided edge detected
Both edges detected
Disabled
Enabled
Not used
Interrupt valid waveform for INT1 pin/
return level selection bit (Note 3)
INT1 pin edge detection circuit control bit
INT1 pin
timer 3 control enable bit
Notes 1: “R” represents read enabled, and “W” represents write enabled.
2: When the contents of I12 is changed, the external interrupt request flag EXF0 may be set. Accordingly, clear EXF0 flag with the SNZ0 instruction.
3: When the contents of I22 is changed, the external interrupt request flag EXF1 may be set. Accordingly, clear EXF1 flag with the SNZ1 instruction.
Interrupt control register I1
R/W
at RAM back-up : state retained
at reset : 00002
This bit has no function, but read/write is enabled.
Falling waveform (“L” level of INT0 pin is recognized with the SNZI0
instruction)/“L” level
Rising waveform (“H” level of INT0 pin is recognized with the SNZI0
instruction)/“H” level
One-sided edge detected
Both edges detected
Disabled
Enabled
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Interrupt control register I2
R/W
at RAM back-up : state retained
at reset : 00002
相关PDF资料
PDF描述
M38869MCA-XXXGP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP80
MC68HC05P3CDWR3 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC05P4ACDWR2 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MSU2958C16-007P 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PDIP40
MSU2958C16-007Q 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
M34513T-PTCA 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 1.778mm-pitch SDIP (for 4500 Series)
M34513T-PTCB 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 1.778mm-pitch SDIP to 40-core narrow-pitch(for 4500 Series)
M34513T-PTCC 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting 40-core narrow-pitch to 32-pin 0.8mm-pitch LQFP(for 4500 Series)
M34514E8 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34514E8FP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER