- 您现在的位置：买卖IC网 > PDF目录67761 > M34571G4FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24 PDF资料下载
参数资料
| 型号： | M34571G4FP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24 |
| 封装： | 5.30 X 10.10 MM, 0.80 MM PITCH, PLASTIC, SSOP-24 |
| 文件页数： | 17/33页 |
| 文件大小： | 1526K |
| 代理商： | M34571G4FP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
Rev.1.02
May 25, 2007
Page 22 of 124
REJ03B0179-0102
4571 Group
(1) External 0 interrupt request flag (EXF0)
External 0 interrupt request flag (EXF0) is set to “1” when a
valid waveform is input to P20/INT0 pin.
The valid waveforms causing the interrupt must be retained at
their level for 4 clock cycles or more of the system clock (Refer
to Figure 22).
The state of EXF0 flag can be examined with the skip instruction
(SNZ0). Use the interrupt control register V1 to select the
interrupt or the skip instruction. The EXF0 flag is cleared to “0”
when an interrupt occurs or when the next instruction is skipped
with the skip instruction.
External 0 interrupt activated condition
External 0 interrupt activated condition is satisfied when a
valid waveform is input to P20/INT0 pin.
The valid waveform can be selected from rising waveform,
falling waveform or both rising and falling waveforms. An
example of how to use the external 0 interrupt is as follows.
(1) Set the bit 3 of register I1 to “1” for the INT0 pin to be in the
input enabled state.
(2) Select the valid waveform with the bits 1 and 2 of register
I1.
(3) Clear the EXF0 flag to “0” with the SNZ0 instruction.
(4) Set the NOP instruction for the case when a skip is
performed with the SNZ0 instruction.
(5) Set both the external 0 interrupt enable bit (V10) and the
INTE flag to “1.”
The external 0 interrupt is now enabled. Now when a valid
waveform is input to the P20/INT0 pin, the EXF0 flag is set to
“1” and the external 0 interrupt occurs.
(2) External 1 interrupt request flag (EXF1)
External 1 interrupt request flag (EXF1) is set to “1” when a
valid waveform is input to P21/INT1 pin.
The valid waveforms causing the interrupt must be retained at
their level for 4 clock cycles or more of the system clock (Refer
to Figure 22).
The state of EXF1 flag can be examined with the skip instruction
(SNZ1). Use the interrupt control register V1 to select the
interrupt or the skip instruction. The EXF1 flag is cleared to “0”
when an interrupt occurs or when the next instruction is skipped
with the skip instruction.
External 1 interrupt activated condition
External 1 interrupt activated condition is satisfied when a
valid waveform is input to P21/INT1 pin.
The valid waveform can be selected from rising waveform,
falling waveform or both rising and falling waveforms. An
example of how to use the external 1 interrupt is as follows.
(1) Set the bit 3 of register I2 to “1” for the INT1 pin to be in the
input enabled state.
(2) Select the valid waveform with the bits 1 and 2 of register
I2.
(3) Clear the EXF1 flag to “0” with the SNZ1 instruction.
(4) Set the NOP instruction for the case when a skip is
performed with the SNZ1 instruction.
(5) Set both the external 1 interrupt enable bit (V11) and the
INTE flag to “1.”
The external 1 interrupt is now enabled. Now when a valid
waveform is input to the P21/INT1 pin, the EXF1 flag is set to
“1” and the external 1 interrupt occurs.
相关PDF资料 |
PDF描述 |
|---|---|
| M34571G6FP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24 |
| M35015-XXXSP | 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDIP20 |
| M35014-XXXSP | 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDIP20 |
| M35040-XXXFP | 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDSO20 |
| M35047-XXXFP | 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M34571G4-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34571G6 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34571G6FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34571G6-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34571GD | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。