参数资料
型号: M37225M6-XXXSP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
封装: 0.600 INCH, PLASTIC, SDIP-42
文件页数: 56/126页
文件大小: 1486K
代理商: M37225M6-XXXSP
35
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER
with ON-SCREEN DISPLAY CONTROLLER
M37225M6/M8/MA/MC–XXXSP
M37225ECSP
MITSUBISHI MICROCOMPUTERS
Rev. 1.0
8.6.4 I2C Control Register
The I2C control register (address 00DA16) controls the data commu-
nication format.
(1) Bits 0 to 2: bit counter (BC0–BC2)
These bits decide the number of bits for the next 1-byte data to be
transmitted. An interrupt request signal occurs immediately after the
number of bits specified with these bits are transmitted.
When a START condition is received, these bits become “0002” and
the address data is always transmitted and received in 8 bits.
(2) Bit 3: I2C interface use enable bit (ESO)
This bit enables usage of the multimaster I2C BUS interface. When
this bit is set to “0,” the use disable status is provided, so the SDA
and the SCL become high-impedance. When the bit is set to “1,” use
of the interface is enabled.
When ESO = “0,” the following is performed.
PIN = “1,” BB = “0” and AL = “0” are set (they are bits of the I2C
status register at address 00D916 ).
Writing data to the I2C data shift register (address 00D716) is dis-
abled.
(3) Bit 4: data format selection bit (ALS)
This bit decides whether or not to recognize slave addresses. When
this bit is set to “0,” the addressing format is selected, so that ad-
dress data is recognized. When a match is found between a slave
address and address data as a result of comparison or when a gen-
eral call (refer to “8.6.5 I2C Status Register,” bit 1) is received, trans-
mission processing can be performed. When this bit is set to “1,” the
free data format is selected, so that slave addresses are not recog-
nized.
(4) Bit 5: addressing format selection bit (10BIT SAD)
This bit selects a slave address specification format. When this bit is
set to “0,” the 7-bit addressing format is selected. In this case, only
the high-order 7 bits (slave address) of the I2C address register (ad-
dress 00D816) are compared with address data. When this bit is set
to “1,” the 10-bit addressing format is selected, all the bits of the I2C
address register are compared with address data.
(5) Bits 6 and 7: connection control bits between
I2C-BUS interface and ports
(BSEL0, BSEL1)
These bits controls the connection between SCL and ports or SDA
and ports (refer to Figure 8.6.5).
Fig. 8.6.5 Connection Port Control by BSEL0 and BSEL1
“0”
“1” BSEL0
P11/SCL1
P12/SCL2
“0”
“1” BSEL1
“0”
“1” BSEL0
P13/SDA1
P14/SDA2
“0”
“1” BSEL1
Multi-master
I2C-BUS
interface
SCL
SDA
相关PDF资料
PDF描述
M37225MA-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37225MC-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37225ECSP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37250M6-XXXSP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDIP64
M37260E6FP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
M37225M8 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SNGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37225MA 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SNGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M372429100 制造商:ITW Switches 功能描述:IN-RUSH
M372429200 制造商:ITW Switches 功能描述:IN-RUSH
M372499100 制造商:ITW Switches 功能描述:IN-RUSH