- 您现在的位置：买卖IC网 > PDF目录67762 > M37534M4-XXXGP 8-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32 PDF资料下载
参数资料
| 型号： | M37534M4-XXXGP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32 |
| 封装： | 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32 |
| 文件页数： | 4/56页 |
| 文件大小： | 699K |
| 代理商： | M37534M4-XXXGP |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
7534 Group
Rev.3.00
Oct 23, 2006
page 12 of 53
REJ03B0099-0300
I/O Ports
[Direction registers] PiD
The I/O ports have direction registers which determine the input/out-
put direction of each pin. Each bit in a direction register corresponds
to one pin, and each pin can be set to be input or output.
When “1” is set to the bit corresponding to a pin, this pin becomes an
output port. When “0” is set to the bit, the pin becomes an input port.
When data is read from a pin set to output, not the value of the pin
itself but the value of port latch is read. Pins set to input are floating,
and permit reading pin values.
If a pin set to input is written to, only the port latch is written to and the
pin remains floating.
[Pull-up control] PULL
By setting the pull-up control register (address 001616), ports P0 and
P3 can exert pull-up control by program. However, pins set to output
are disconnected from this control and cannot exert pull-up control.
[Port P1P3 control] P1P3C
By setting the port P1P3 control register (address 001716), a CMOS
input level or a TTL input level can be selected for ports P10, P12,
P13, P36 and P37 by program.
Then, as for the 36-pin version, set “1” to each bit 6 of the port P3
direction register and port P3 register.
As for the 32-pin version, set “1” to respective bits 5, 6, 7 of the port
P3 direction register and port P3 register.
Fig. 13 Structure of port P1P3 control register
Fig. 12 Structure of pull-up control register
Pull-up control register
(PULL: address 0016 16)
P00 pull-up control bit
P01 pull-up control bit
P02, P03 pull-up control bit
P04 – P07 pull-up control bit
P30 – P33 pull-up control bit
P34 pull-up control bit
P35, P36 pull-up control bit
P37 pull-up control bit
Note : Pins set to output ports are disconnected from pull-up control.
b7
b0
0: Pull-up off
1: Pull-up on
Initial value: FF16
Port P1P3 control register
(P1P3C: address 0017 16)
b7
b0
P37/INT0 input level selection bit
0 : CMOS level
1 : TTL level
P36/INT1 input level selection bit
0 : CMOS level
1 : TTL leve
P10,P12,P13 input level selection bit
0 : CMOS level
1 : TTL level
Not used
相关PDF资料 |
PDF描述 |
|---|---|
| M37630E4T-XXXFP | 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PQFP44 |
| M37630E4FS | 8-BIT, UVPROM, 10 MHz, MICROCONTROLLER, CQCC80 |
| M37641M8-XXXHP | 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80 |
| M37641F8HP | 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80 |
| M37643F8FP | 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37534M4-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37534RSS | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37536E8SP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37536M4 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37536M4-XXXSP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。