参数资料
型号: M37643F8HP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80
封装: 12 X 12 MM, 0.50 MM PITCH, PLASTIC, LQFP-80
文件页数: 59/123页
文件大小: 1292K
代理商: M37643F8HP
Rev.2.00
Aug 28, 2006
page 38 of 119
7643 Group
REJ03B0054-0200
(1) Cycle Steal Transfer Mode
When the DMAC Channel x (x = 0, 1) Transfer Mode Selection Bit
(DxTMS) is set to “0”, the respective DMAC Channel x operates in
the cycle steal transfer mode.
When a request of the specified transfer factor is generated, the
selected channel transfers one byte of data from the address indi-
cated by the Source Register into the address indicated by the
Destination Register.
There are two kinds of DMA transfer triggers supported: hardware
transfer factor and software trigger. Hardware transfer factors can
be selected by the DMACx (x = 0, 1) Hardware Transfer Request
source Bit (DxHR). To only use the Interrupt Request Bit, the inter-
rupt can be disabled by setting its Interrupt Enable Bit of Interrupt
Control Register to “0”.
The DMA transfer request as a software trigger can be generated
by setting the DMA Channel x (x = 0, 1) Software Transfer Trigger
Bit (DxSWT) to “1”.
The Source Registers and Transfer Destination Registers can be
either decreased or increased by 1 after transfer completion by
setting bits 0 to 3 in the DMAC Channel x (x = 0, 1) Mode Regis-
ter. When the Transfer Count Register underflows, the Source
Registers and Destination Registers are reloaded from their
latches if the DMAC Register Reload Disable Bit (DRLDD) is “0”.
The Transfer Count Register value is reloaded after an underflow
regardless of DRLDD setting. At the same time, the DMAC Inter-
rupt Request Bit and the DMA Channel x (x = 0, 1) Count Register
Underflow Flag are set to “1”.
The DMAC Channel x Disable After Count Register Underflow En-
able Bit (DxDAUE) is “1”, the DMAC Channel x Enable Bit
(DxCEN) goes to “0” at an under flows of Transfer Count Register.
By setting the DMAC Channel x (x = 0, 1) Register Reload Bit
(DxRLD) to “1”, the Source Registers, Destination Registers, and
Transfer Count Registers can be updated to the values in their re-
spective latches.
相关PDF资料
PDF描述
M37700E2AFS 16-BIT, UVPROM, 16 MHz, MICROCONTROLLER, CQCC80
M37700E2AXXXFP 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
M37701E2-XXXSP 16-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP64
M37702E4EXXXFP 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
M37702M2BXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M37643F8M8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37643M8E8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37643M8M8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M3764A-12 制造商:OK International 功能描述:
M3765 制造商:未知厂家 制造商全称:未知厂家 功能描述:HORN/SIREN WITH SOFT CHIRP 6 ALARM SOUNDS