- 您现在的位置：买卖IC网 > PDF目录69014 > M37702M2AXXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80 PDF资料下载
参数资料
| 型号： | M37702M2AXXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80 |
| 封装： | QFP-80 |
| 文件页数： | 4/61页 |
| 文件大小： | 760K |
| 代理商： | M37702M2AXXXFP |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页
9
MITSUBISHI MICROCOMPUTERS
M37702M2AXXXFP, M37702M2BXXXFP
M37702S1AFP, M37702S1BFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
5. Index register length flag (x)
The index register length flag determines whether index register X
and index register Y are used as 16-bit registers or as 8-bit regis-
ters. The registers are used as 16-bit registers when flag x is “0”
and as 8-bit registers when it is “1”. This flag can be set and reset
with the SEP and CLP instructions.
6. Data length flag (m)
The data length flag determines whether the data length is 16-bit
or 8-bit. The data length is 16-bit when flag m is “0” and 8-bit when
it is “1”. This flag can be set and reset with the SEM and CLM in-
structions or with the SEP and CLP instructions.
7. Overflow flag (V)
The overflow flag has meaning when addition or subtraction is
performed a word as signed binary number. When the data length
flag m is “0”, the overflow flag is set when the result of addition or
subtraction is outside the range between –32768 and +32767.
When the data length flag m is “1”, the overflow flag is set when
the result of addition or subtraction is outside the range between
–128 and +127. It is reset in all other cases. The overflow flag can
also be set and reset directly with the SEP, and CLV or CLP in-
structions.
8. Negative flag (N)
The negative flag is set when the result of arithmetic operation or
data transfer is negative (If data length flag m is “0”, when data bit
15 is “1”. If data length flag m is “1”, when data bit 7 is “1”.) It is re-
set in all other cases. It can also be set and reset with the SEP
and CLP instructions.
9. Processor interrupt priority level (IPL)
The processor interrupt priority level (IPL) consists of 3 bits and
determines the priority of processor interrupts from level 0 to level
7. Interrupt is enabled when the interrupt priority of the device re-
questing interrupt (set using the interrupt control register) is higher
than the processor interrupt priority. When interrupt is enabled, the
current processor interrupt priority level is saved in a stack and the
processor interrupt priority level is replaced by the interrupt prior-
ity level of the device requesting the interrupt. Refer to the section
on interrupts for more details.
BUS INTERFACE UNIT
The CPU operates on an internal clock frequency which is ob-
tained by dividing the external clock frequency f(XIN) by two. This
frequency is twice the bus cycle frequency. In order to speed-up
processing, a bus interface unit is used to pre-fetch instructions
when the data bus is idle. The bus interface unit synchronizes the
CPU and the bus and pre-fetches instructions. Figure 4 shows the
relationship between the CPU and the bus interface unit. The bus
interface unit has a program address register, a 3-byte instruction
queue buffer, a data address register, and a 2-byte data buffer.
The bus interface unit obtains an instruction code from memory
and stores it in the instruction queue buffer, obtains data from
memory and stores it in the data buffer, or writes the data from the
data buffer to the memory.
Fig. 4 Relationship between the CPU and the bus interface unit
CPU
Bus interface
unit
E
ALE
BYTE
HOLD
BHE
R/W
D15 to D8
A23 to A0
D7 to D0
D'15 to D'8
Control signal
D'7 to D'0
A'23 to A'0
相关PDF资料 |
PDF描述 |
|---|---|
| M37702S1BFP | 16-BIT, 25 MHz, MICROCONTROLLER, PQFP80 |
| M37702S1LGP | 16-BIT, 8 MHz, MICROCONTROLLER, PQFP80 |
| M37702S1LHP | 16-BIT, 8 MHz, MICROCONTROLLER, PQFP80 |
| M37702M2LXXXHP | 16-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80 |
| M37702M2LXXXGP | 16-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37702M2A-XXXFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37702M2BXXXFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37702M2B-XXXFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37702M2L | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37702M2L249HP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。