参数资料
型号: M38224M6HXXXFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件页数: 43/80页
文件大小: 1329K
代理商: M38224M6HXXXFP
47
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
3822 Group
MITSUBISHI MICROCOMPUTERS
NOTES ON USE
Countermeasures against noise
(1) Shortest wiring length
Wiring for RESET pin
Make the length of wiring which is connected to the RESET pin
as short as possible. Especially, connect a capacitor across the
RESET pin and the VSS pin with the shortest possible wiring
(within 20mm).
q Reason
The width of a pulse input into the RESET pin is determined by
the timing necessary conditions. If noise having a shorter pulse
width than the standard is input to the RESET pin, the reset is
released before the internal state of the microcomputer is com-
pletely initialized. This may cause a program runaway.
(2) Connection of bypass capacitor across VSS line and VCC line
In order to stabilize the system operation and avoid the latch-up,
connect an approximately 0.1
F bypass capacitor across the VSS
line and the VCC line as follows:
Connect a bypass capacitor across the VSS pin and the VCC pin
at equal length.
Connect a bypass capacitor across the VSS pin and the VCC pin
with the shortest possible wiring.
Use lines with a larger diameter than other signal lines for VSS
line and VCC line.
Connect the power source wiring via a bypass capacitor to the
VSS pin and the VCC pin.
Wiring for clock input/output pins
Make the length of wiring which is connected to clock I/O pins
as short as possible.
Make the length of wiring (within 20 mm) across the grounding
lead of a capacitor which is connected to an oscillator and the
VSS pin of a microcomputer as short as possible.
Separate the VSS pattern only for oscillation from other VSS
patterns.
q Reason
If noise enters clock I/O pins, clock waveforms may be de-
formed. This may cause a program failure or program runaway.
Also, if a potential difference is caused by the noise between
the VSS level of a microcomputer and the VSS level of an oscil-
lator, the correct clock will not be input in the microcomputer.
RESET
Reset
circuit
Noise
VSS
Reset
circuit
VSS
RESET
VSS
N.G.
O.K.
Noise
XIN
XOUT
VSS
XIN
XOUT
VSS
N.G.
O.K.
VSS
VCC
VSS
VCC
N.G.
O.K.
Fig. 47 Wiring for clock I/O pins
Fig. 46 Wiring for the RESET pin
Fig. 48 Bypass capacitor across the VSS line and the VCC line
相关PDF资料
PDF描述
MC68HC908GR4ACDW 8-BIT, FLASH, 8.2 MHz, MICROCONTROLLER, PDSO28
MC9S12DJ256CFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
M35076-001SP 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDIP20
MC9S08SG16JTG 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDSO16
MC9S08SG32WTJR 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDSO20
相关代理商/技术参数
参数描述
M38227ECFP 功能描述:IC 740 MCU EPROM 48K 80QFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 产品培训模块:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 标准包装:1 系列:M16C™ M32C/80/87 核心处理器:M32C/80 芯体尺寸:16/32-位 速度:32MHz 连通性:EBI/EMI,I²C,IEBus,IrDA,SIO,UART/USART 外围设备:DMA,POR,PWM,WDT 输入/输出数:121 程序存储器容量:384KB(384K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:24K x 8 电压 - 电源 (Vcc/Vdd):3 V ~ 5.5 V 数据转换器:A/D 34x10b,D/A 2x8b 振荡器型:内部 工作温度:-20°C ~ 85°C 封装/外壳:144-LQFP 包装:托盘 产品目录页面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38227ECFP#U0 功能描述:MCU 3/5V 48K PB-FREE 80-QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:56F8xxx 核心处理器:56800E 芯体尺寸:16-位 速度:60MHz 连通性:CAN,SCI,SPI 外围设备:POR,PWM,温度传感器,WDT 输入/输出数:21 程序存储器容量:40KB(20K x 16) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:6K x 16 电压 - 电源 (Vcc/Vdd):2.25 V ~ 3.6 V 数据转换器:A/D 6x12b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:48-LQFP 包装:托盘 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
M38227ECFS 制造商:Renesas Electronics Corporation 功能描述:MCU 8BIT 740 CISC 48KB EPROM 5V 80CLCC - Bulk
M38227FGFP 制造商:Renesas Electronics Corporation 功能描述:SLIM740 OTP 16K/512B RAM, W/A-D, LED, 4 - Rail/Tube
M38227RFS 制造商:Renesas Electronics Corporation 功能描述:MCU - Trays