参数资料
型号: M41T50Q6
厂商: STMICROELECTRONICS
元件分类: 时钟/数据恢复及定时提取
英文描述: 1 TIMER(S), REAL TIME CLOCK, QCC16
封装: 3 X 3 MM, LEAD FREE, QFN-16
文件页数: 3/23页
文件大小: 286K
代理商: M41T50Q6
11/23
M41T50
CLOCK OPERATION
The
eight
byte
clock
register
(see
2., page 12) is used to both set the clock and to
read the date and time from the clock, in a binary
coded decimal format. Reserved0, Seconds, Min-
utes, and Hours are contained within the first four
registers.
Bits D0 through D2 of Register 04h contain the
Day (day of week). Registers 05h, 06h, and 07h
contain the Date (day of month), Month, and
Years. Bit D7 of Register 01h contains the STOP
Bit (ST). Setting this bit to a '1' will cause the oscil-
lator to stop. When reset to a '0' the oscillator re-
starts within one second (typical).
Bits D6 and D7 of Clock Register 06h (Century/
Month Register) contain the CENTURY Bit 0
(CB0) and CENTURY Bit 1 (CB1).
Note: A WRITE to ANY location within the first
eight bytes of the clock register (00h-07h), includ-
ing the 60Hz Bit and CB0-CB1 Bits will result in an
update of the system clock and a reset of the divid-
er chain. This could result in an inadvertent
change of the current time. These non-clock relat-
ed bits should be written prior to setting the clock,
and remain unchanged until such time as a new
clock time is also written.
The eight Clock Registers may be read one byte at
a time, or in a sequential block. Provision has been
made to assure that a clock update does not occur
while any of the eight clock addresses are being
read. If a clock address is being read, an update of
the clock registers will be halted. This will prevent
a transition of data during the READ.
Bit D6 of Register 0Ch (Alarm Hour Register) con-
tains the SQW Open Drain Bit (SQWOD). When
this bit is set to '1,' the Square Wave output will be-
come an open drain output and require a pull-up
register.
Digital Clock Input
The M41T50 requires an external clock source of
50Hz or 60Hz (45% to 55% duty cycle) for the
clock function. Bit D7 (60Hz bit) of Register 05h
(Date Register) is used to select between a 50Hz
(60Hz Bit = '0') or a 60Hz (60Hz Bit = '1') clock in-
put frequency signal. The 60Hz Bit defaults to '1'
on power-up.
TIMEKEEPER Registers
The M41T50 offers 16 internal registers which
contain Clock, Alarm, and Flag Registers. The
Clock registers are memory locations which con-
tain external (user accessible) and internal copies
of the data (usually referred to as BiPORT TIME-
KEEPER cells). The external copies are indepen-
dent of internal functions except that they are
updated periodically by the simultaneous transfer
of the incremented internal copy. The internal di-
vider (or clock) chain will be reset upon the com-
pletion of a WRITE to any clock address (00h to
07h).
The system-to-user transfer of clock data will be
halted whenever the address being read is a clock
address (00h to 07h). The update will resume ei-
ther due to a Stop Condition or when the pointer
increments to a non-clock address.
TIMEKEEPER and Alarm Registers store data in
BCD format.
相关PDF资料
PDF描述
M41T56BN6 0 TIMER(S), REAL TIME CLOCK, PDIP8
M41T56C64MY6F REAL TIME CLOCK, PDSO18
M41T80M6F 1 TIMER(S), REAL TIME CLOCK, PDSO8
M41T81MQ6 1 TIMER(S), REAL TIME CLOCK, PDSO16
M41T81MQ6TR 1 TIMER(S), REAL TIME CLOCK, PDSO16
相关代理商/技术参数
参数描述
M41T50Q6F 功能描述:实时时钟 1.7V to 3.6V RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
M41T56 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:512 bit 64b x8 Serial Access TIMEKEEPER SRAM
M41T56_07 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial real-time clock with 56 bytes NVRAM
M41T56_11 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial real-time clock (RTC) with 56 bytes NVRAM
M41T56C64 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial Real Time Clock with 56 bytes of NVRAM+64 Kbit (8192 bit x 8) EEPROM