- 您现在的位置：买卖IC网 > PDF目录45049 > M41T50Q6F (STMICROELECTRONICS) 1 TIMER(S), REAL TIME CLOCK, QCC16 PDF资料下载
参数资料
| 型号： | M41T50Q6F |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, QCC16 |
| 封装： | 3 X 3 MM, LEAD FREE, QFN-16 |
| 文件页数： | 22/23页 |
| 文件大小： | 288K |
| 代理商： | M41T50Q6F |
M41T50
8/23
READ Mode
In this mode the master reads the M41T50 slave
after setting the slave address (see Figure
8., page 9). Following the WRITE Mode Control
Bit (R/W=0) and the Acknowledge Bit, the word
address 'An' is written to the on-chip address
pointer. Next the START condition and slave ad-
dress are repeated followed by the READ Mode
Control Bit (R/W=1). At this point the master trans-
mitter becomes the master receiver. The data byte
which was addressed will be transmitted and the
master receiver will send an Acknowledge Bit to
the slave transmitter. The address pointer is only
incremented on reception of an Acknowledge
Clock. The M41T50 slave transmitter will now
place the data byte at address An+1 on the bus,
the master receiver reads and acknowledges the
new byte and the address pointer is incremented
to “An+2.”
This cycle of reading consecutive addresses will
continue until the master receiver sends a STOP
condition to the slave transmitter.
The system-to-user transfer of clock data will be
halted whenever the address being read is a clock
address (00h to 07h). The update will resume due
to a Stop Condition or when the pointer increments
to any non-clock address (08h-0Fh).
Note: This is true both in READ Mode and WRITE
Mode.
An alternate READ Mode may also be implement-
ed whereby the master reads the M41T50 slave
without first writing to the (volatile) address point-
er. The first address that is read is the last one
stored in the pointer (see Figure 9., page 9).
Figure 7. Slave Address Location
AI00602
R/W
SLAVE ADDRESS
START
A
0
100
0
11
MSB
LSB
相关PDF资料 |
PDF描述 |
|---|---|
| M41T63Q6F | 1 TIMER(S), REAL TIME CLOCK, QCC16 |
| M41T65Q6F | 1 TIMER(S), REAL TIME CLOCK, QCC16 |
| M41T64Q6F | 1 TIMER(S), REAL TIME CLOCK, QCC16 |
| M41T66Q6F | REAL TIME CLOCK, QCC16 |
| M41T81M6F | 1 TIMER(S), REAL TIME CLOCK, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M41T56 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:512 bit 64b x8 Serial Access TIMEKEEPER SRAM |
| M41T56_07 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial real-time clock with 56 bytes NVRAM |
| M41T56_11 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial real-time clock (RTC) with 56 bytes NVRAM |
| M41T56C64 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial Real Time Clock with 56 bytes of NVRAM+64 Kbit (8192 bit x 8) EEPROM |
| M41T56C64MY6E | 功能描述:实时时钟 SERIAL REAL TIME CLOCK W/56 BYTES RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。