- 您现在的位置：买卖IC网 > PDF目录359064 > M48T248V-85PM1 (意法半导体) FILTER SAW 313.85MHZ REMOTE SMD PDF资料下载
参数资料
| 型号： | M48T248V-85PM1 |
| 厂商： | 意法半导体 |
| 英文描述： | FILTER SAW 313.85MHZ REMOTE SMD |
| 中文描述： | 5.0或3.3V，1024K与幻象计时器的SRAM |
| 文件页数： | 17/24页 |
| 文件大小： | 306K |
| 代理商： | M48T248V-85PM1 |
17/24
M48T248Y, M48T248V
Clock Register Information
Clock information is contained in eight registers of
8 bits, each of which is sequentially accessed one
(1) bit at a time after the 64-bit pattern recognition
sequence has been completed. When updating
the clock registers, each must be handled in
groups of 8 bits. Writing and reading individual bits
within a register could produce erroneous results.
These READ/WRITE registers are defined in the
clock register map (see Table 10).
Data contained in the clock registers is in Binary
Coded Decimal format (BCD). Reading and writing
the registers is always accomplished by stepping
through all eight registers, starting with Bit 0 of
Register 0 and ending with Bit 7 of Register 7.
Clock Accuracy
The RTC is guaranteed to keep time accuracy to
with ±1 minute per month at 25°C. The clock is fac-
tory-tuned with special calibration elements, and
does not require additional calibration. Moderate
temperature deviation will have a negligible effect
in most applications.
AM-PM/12/24 Mode
Bit 7 of the hours register is defined as the 12-hour
or 24-hour mode select bit. When it is high, the 12-
hour mode is selected. In the 12-hour mode, Bit 5
is the AM/PM bit with the logic high being “PM.” In
the 24-hour mode, Bit 5 is the second 10-hour bit
(20-23 hours).
Oscillator and Reset Bits
Bits 4 and 5 of the day register are used to control
the reset and oscillator functions. Bit 4 controls the
reset pin input. When the reset bit is set to logic '1,'
the Reset Input pin is ignored. When the reset bit
logic is set to '0,' a low input on the reset pin will
cause the device to abort data transfer without
changing data in the timekeeping registers. Reset
operates independently of all other inputs. Bit 5
controls the oscillator. When set to logic '0,' the os-
cillator turns on and the RTC/calendar begins to
increment.
Zero Bits
Registers 1, 2, 3, 4, 5, and 6 contain one (1) or
more bits that will always read logic '0.' When writ-
ing to these locations, either a logic '1' or '0' is ac-
ceptable.
Table 10. Phantom Clock Register Map
Keys: A/P = AM/PM Bit
12/24 = 12 or 24-hour mode Bit
OSC = Oscillator Bit
RST = Reset Bit
0 = Must be set to '0'
Function/Range
BCD Format
Register
D7
D6
D5
D4
D3
D2
D1
D0
0
0.1 Seconds
0.01 Seconds
Seconds
00-99
1
0
10 Seconds
Seconds
Seconds
00-59
2
0
10 Minutes
Minutes
Minutes
00-59
3
12/24
0
10 /
A/P
Hrs
Hours (24 Hour Format)
Hours
01-12/
00-23
4
0
0
OSC
RST
0
Day of the Week
Day
01-7
5
0
0
10 date
Date: Day of the Month
Date
01-31
6
0
0
0
10M
Month
Month
01-12
7
10 Years
Year
Year
00-99
相关PDF资料 |
PDF描述 |
|---|---|
| M48T248V | 5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T248V-85PM1TR | 5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T248VPM | 5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T251V-70PM1 | 5.0 or 3.3V, 4096K TIMEKEEPER SRAM with PHANTOM |
| M48T251V-70PM1TR | 5.0 or 3.3V, 4096K TIMEKEEPER SRAM with PHANTOM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M48T248V-85PM1TR | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T248VPM | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T248Y | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
| M48T248Y-70PM1 | 功能描述:实时时钟 1M (128Kx8) 70ns RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| M48T248Y-70PM1TR | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0 or 3.3V, 1024K TIMEKEEPER SRAM with PHANTOM |
发布紧急采购，3分钟左右您将得到回复。