- 您现在的位置：买卖IC网 > PDF目录262951 > M83731/14-351 (ITT CANNON) TOGGLE SWITCH, DPDT, MOMENTARY, 5A, 28VDC, THROUGH HOLE-RIGHT ANGLE PDF资料下载
参数资料
| 型号： | M83731/14-351 |
| 厂商： | ITT CANNON |
| 元件分类： | 开关 |
| 英文描述： | TOGGLE SWITCH, DPDT, MOMENTARY, 5A, 28VDC, THROUGH HOLE-RIGHT ANGLE |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 1/5页 |
| 文件大小： | 343K |
| 代理商： | M83731/14-351 |
G–17
Military/Aerospace/HI-REL
C&K MIL-S-83731 Toggle Switches
G
To
g
gle
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
MATERIALS
CASE: Diallyl phthalate (DAP) (UL 94 V-0).
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
ACTUATOR: Brass, chrome plated.
SWITCH SUPPORT: Brass, tin plated.
TERMINALS: Gold over nickel over copper alloy.
TERMINAL SEAL: Epoxy.
CONTACTS: Gold over nickel over silver over brass.
PANEL SEAL: Silicone rubber.
MOUNTING HARDWARE: One hexagon nut, brass with
nickel plating; one lockwasher, steel with nickel
plating; one locking ring, brass with nickel plating.
HOW TO ORDER: Complete part numbers for MIL-S-83731 TOGGLE SWITCHES are shown on pages G–18 through G–21.
CURRENT RATINGS – HIGH LEVEL
Current Capacity in Amperes – Per Pole
28V dc
115V ac, 400 Hz
125V ac, 60
Hz
Lamp Load
111
Resistive Load
Inductive Load
22
2
55
5
CURRENT RATINGS – LOGIC LEVEL
0.5 Volt – Amp (VA) Max. @ 28 V Max. (AC or DC)
RATINGS
Test Requirement
MIL-S-83731/9, 10, 13, 14, 15, 16
1.
Strength of Terminal
1 lb. – solder lug
2.
Strength of Actuating Lever Pivot and Stop
10 lbs. & 8 lbs. throughout range
3.
Strength of Mounting Means
15 lbs. in. torque on bushing
4.
Dielectric (Sea Level) Indication
1000 VAC Group B, 750 VAC after electrical endurance. 500 A max. leakage
5.
Contact Voltage Drop
2.5 millivolt initial, 5.0 millivolt after mechanical endurance @ 2-6 VDC 0.1 amp
6.
Temperature Rise
7.
Short Circuit
10 operations carry 100 amps resistive load @ lowest DC volts
8.
Mechanical Life
20K operations at specified high and low temperatures
9.
Electrical Endurance
10K operations at specified high and low temperatures
10. Overload
50 operations @ 150% of rated resistive load
11. Electrical Endurance at Sea Level
10K operations resistive load @ room temperature
10K operations inductive load @ room temperature
10K operations lamp load @ room temperature
Performed on different test samples
12. Vibration
Method 204 of MIL-STD-202, test condition A
.06 D. A. or 10 G’s 10-500 Hz, 10 usec. max. chatter
13. Shock
Fuse-method 213 or MIL-STD-202, 10 usec. max. chatter
14. Salt Spray
Test Upon Completion
48 hours – method 101 of MIL-STD-202, test condition B
10 operations resistive load (toggle sealed switches only)
15. Moisture Resistance
Test Upon Completion
Method 106 of MIL-STD-202
100 VDC potential between current carrying parts and panel
16. Sand & Dust
Method 110 of MIL-STD-202, test condition B
6 hours @ 23 C 2.5K operations mechanical life (toggle sealed switches only)
17. Explosion
MIL-STD-202 method 109, maximum rated DC inductive load (toggle sealed switches only)
18. Sealing
Toggle seal – 5 operations under 0.5 inches of H2O above top of bushing
19. A.) Toggle Seal
B.) Bushing Seal
(Toggle sealed switches only)
(Panel sealed switches only)
20. Temperature Operation
Mechanical life, –25 C to +71 C
21. Life Low Cur. Level
No requirement
22. Fungus
No requirement
23. Intermediate Current
20K operations, 35/40 milliamps @ 5 VDC resistive load @ +71 C
24. Thermal Shock
Method 107 of MIL-STD-202 test condition A; 5 cycles @ –55 C/+85 C
50
C rise max. @ rated resistive load after endurance test
Features/Benefits
Qualified to MIL-S-83731
50 inch selective gold contact plating
Epoxy sealed terminals for process compatibility
Rated for logic level to 5 amp resistive loads
and 2 amp inductive loads
Flame retardant housing material
RoHS compliant and compatible
相关PDF资料 |
PDF描述 |
|---|---|
| MDBI01F01A03C | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.7mm, THROUGH HOLE-RIGHT ANGLE |
| MDBI03B01C04D | SNAP ACTING/LIMIT SWITCH, SPDT, ALTERNATE, 0.7mm, THROUGH HOLE-RIGHT ANGLE |
| MDBI01B01A02D | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.7mm, THROUGH HOLE-RIGHT ANGLE |
| MDBI05E01C03C | SNAP ACTING/LIMIT SWITCH, SPDT, ALTERNATE, 0.7mm, THROUGH HOLE-RIGHT ANGLE |
| MDBI05E01C03D | SNAP ACTING/LIMIT SWITCH, SPDT, ALTERNATE, 0.7mm, THROUGH HOLE-RIGHT ANGLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M8373115211 | 制造商:C&K Components 功能描述:SWIT TGL ON OFF ON SPDT TGL PC PINS 5A 125VAC 28VDC 0.5W TH - Bulk |
| M8373115261 | 制造商:C&K Components 功能描述: |
| M837319211 | 功能描述:拨动开关 RoHS:否 制造商:C&K Components 触点形式:DPDT 开关功能:ON - ON - ON 电流额定值: 电压额定值 AC:20 V 电压额定值 DC:20 V 功率额定值:0.4 VA 端接类型:V-Bracket 安装风格: 端子密封:Epoxy 触点电镀:Gold 照明:Not Illuminated |
| M837319231 | 功能描述:拨动开关 RoHS:否 制造商:C&K Components 触点形式:DPDT 开关功能:ON - ON - ON 电流额定值: 电压额定值 AC:20 V 电压额定值 DC:20 V 功率额定值:0.4 VA 端接类型:V-Bracket 安装风格: 端子密封:Epoxy 触点电镀:Gold 照明:Not Illuminated |
| M837319232 | 制造商:C&K Components 功能描述: |
发布紧急采购，3分钟左右您将得到回复。