参数资料
型号: MA03L1NZQD
厂商: C&K Components
文件页数: 5/5页
文件大小: 0K
描述: SWITCH ROTARY SP-3POS
标准包装: 1
系列: M
位置数: 3
层数: 1
每层电极数: 1
每层电路: 单刀三掷
触点额定电压: 0.25A @ 125VAC
触动器类型: 扁平形(直径 3.17mm)
安装类型: 面板安装
端接类型: 焊片
方向: 垂直
摆角: 36°
相关产品: CKN10318-ND - LOCKING RING .468 BLACK
CKN9418-ND - HDWR ADHESIVE MYLAR WASHER M SRS
CKN9416-ND - LOCKING RING .468 NICKEL PLATING
CKN1817-ND - HDWR SW LOCKING RING 1/4"BUSHING
CKN1750-ND - HDWR STOP-PIN FOR M SER SW 1PC
其它名称: *MA03L1NZQD
Q1938519
M Series
Half-inch Rotary Switches
SEAL
D
NO EPOXY SEAL
F
SPLASHPROOF SHAFT AND PANEL SEAL
IP67 approved
Setting Stops With Stop Pins
MA00, MB00, MC00 & MD00 Models Only:
The number of switch positions or stops are adjustable by means of stop pins provided with each switch. Switches are normally
shipped with stop pins and hardware in bulk, not installed. Without stop pins, switches have full 360o rotation and no stops.
Note that all two pole models begin to repeat when actuated 180o or more.
To set stops, refer to figures 1 & 2. Orient switch so that terminal no. 1 is as shown. Turn actuator to position 1, using flats on
bushing and terminal no. 1 as reference. Install CCW stop pin in hole designated ‘X’. Install second stop pin in hole number
corresponding to the number of positions desired. Note that two pole models will begin to repeat when actuated 180o or more.
To retain stop pins, use adhesive mylar washer included; see figure 3.
All models except MX00 models have number of switch positions or stops pre-set at factory and are not adjustable.
Hardware:
Two stop pins, mounting nut, and lockwasher supplied standard.
P/N 537100000
36 o Indexing Models
Top View
Fig. 1
30 o Indexing Models
Top View
Fig. 2
Fig. 3
P/N 537202000
K
Setting Stops With Stop Rings
ME00, MF00, MG00 & MH00 Models Only:
The number of switch positions or stops are adjustable by means of stop rings provided with each switch. These models are
normally shipped with stop rings and hardware in bulk, not installed. Without stop rings, switches have full 360o rotation and no
stops. Note that all two pole models begin to repeat when actuated 180o or more.
To set stops refer to figures 4 & 5. Orient switch so that terminal no. 1 is as shown. Turn actuator to pos. 1 using flats on bushing
and terminal no. 1 as reference. See figure 6 and install inner stop ring with short tab in hole designated ‘X’. Install outer
stop ring with long tab in hole number corresponding to the number of positions desired. Note that all two pole models begin to
repeat when actuated 180o or more. Use mounting nut and lockwasher to retain stop rings.
All MEXX, MFXX, MGXX & MHXX Models (Except MX00 models):
Number of switch positions or stops are preset at factory, but are user adjustable.
Hardware:
Two stop rings, mounting nut and lockwasher supplied standard.
36 o Indexing Models
Top View
30 o Indexing Models
Top View
Fig. 4
Fig. 5
K–17
Fig. 6
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
相关PDF资料
PDF描述
HCM49-25.000MBBK-UT CRYSTAL 25.000 MHZ 20PF SMD
A12515RNZG SWITCH ROTARY SOLDER 8POS
HCM49-32.000MABJ-UT CRYSTAL 32.000 MHZ 18PF SMD
IXFH12N100Q MOSFET N-CH 1000V 12A TO-247AD
A11203RNCB SWITCH ROTARY SP 12POS PC MNT
相关代理商/技术参数
参数描述
MA03L1NZQF 功能描述:旋钮开关 Rotary RoHS:否 制造商:C&K Components 位置数量:5 卡片组数量: 每卡片组极数:2 电流额定值:250 mA 电压额定值:125 V 指数角: 触点类型: 触点形式:DPST 端接类型:Solder 安装类型:Panel 触点电镀:Silver
MA03L2NCGD 功能描述:旋钮开关 RoHS:否 制造商:C&K Components 位置数量:5 卡片组数量: 每卡片组极数:2 电流额定值:250 mA 电压额定值:125 V 指数角: 触点类型: 触点形式:DPST 端接类型:Solder 安装类型:Panel 触点电镀:Silver
MA03L2NCGF 功能描述:旋钮开关 RoHS:否 制造商:C&K Components 位置数量:5 卡片组数量: 每卡片组极数:2 电流额定值:250 mA 电压额定值:125 V 指数角: 触点类型: 触点形式:DPST 端接类型:Solder 安装类型:Panel 触点电镀:Silver
MA03L2NCQD 制造商:C&K Components 功能描述:Switch Rotary SP3T 3 Flush Screwdriver PC Pins 0.25A 125VAC 28VDC 制造商:C&K Components 功能描述:- Bulk 制造商:C&K Components 功能描述:SWITCH ROTARY 制造商:C&K Components 功能描述:MA03L2NCQD
MA03L2NCQF 制造商:ITT 制造商全称:ITT Industries 功能描述:Half-inch Rotary Switches