参数资料
型号: MA10L3NZGD
厂商: ITT CANNON
元件分类: 开关
英文描述: ROTARY SWITCH-10POSITIONS, SP10T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED
封装: ROHS COMPLIANT
文件页数: 5/6页
文件大小: 405K
代理商: MA10L3NZGD
L–16
L
Rotary
C&K M Series
Half-inch Rotary Switches
SEAL
P/N 537100000
P/N 537202000
36 Indexing Models
Top View
30 Indexing Models
Top View
Fig. 1
Fig. 2
Fig. 3
36 Indexing Models
Top View
30 Indexing Models
Top View
Fig. 4
Fig. 5
Fig. 6
F
SPLASHPROOF SHAFT AND PANEL SEAL
D
NO EPOXY SEAL
Setting Stops With Stop Pins
MA00, MB00, MC00 & MD00 Models Only:
The number of switch positions or stops are adjustable by means of stop pins provided with each switch. Switches are normally
shipped with stop pins and hardware in bulk, not installed. Without stop pins, switches have full 360 rotation and no stops.
Note that all two pole models begin to repeat when actuated 180 or more.
To set stops, refer to figures 1 & 2. Orient switch so that terminal no. 1 is as shown. Turn actuator to position 1, using flats on
bushing and terminal no. 1 as reference. Install CCW stop pin in hole designated ‘X’. Install second stop pin in hole number
corresponding to the number of positions desired. Note that two pole models will begin to repeat when actuated 180 or more.
To retain stop pins, use adhesive mylar washer included; see figure 3.
All models except MX00 models have number of switch positions or stops pre-set at factory and are not adjustable.
Hardware:
Two stop pins, mounting nut, and lockwasher supplied standard.
Setting Stops With Stop Rings
ME00, MF00, MG00 & MH00 Models Only:
The number of switch positions or stops are adjustable by means of stop rings provided with each switch. These models are
normally shipped with stop rings and hardware in bulk, not installed. Without stop rings, switches have full 360 rotation and no
stops. Note that all two pole models begin to repeat when actuated 180 or more.
To set stops refer to figures 4 & 5. Orient switch so that terminal no. 1 is as shown. Turn actuator to pos. 1 using flats on bushing
and terminal no. 1 as reference. See figure 6 and install inner stop ring with short tab in hole designated ‘X’. Install outer
stop ring with long tab in hole number corresponding to the number of positions desired. Note that all two pole models begin to
repeat when actuated 180 or more. Use mounting nut and lockwasher to retain stop rings.
All MEXX, MFXX, MGXX & MHXX Models (Except MX00 models):
Number of switch positions or stops are preset at factory, but are user adjustable.
Hardware:
Two stop rings, mounting nut and lockwasher supplied standard.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
相关PDF资料
PDF描述
MA10S1NZQD ROTARY SWITCH-10POSITIONS, SP10T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED
MB03S1NZGF ROTARY SWITCH-3POSITIONS, DP3T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED
MB03S6NCGD ROTARY SWITCH-3POSITIONS, DP3T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT
MB04S1NCQD ROTARY SWITCH-4POSITIONS, DP4T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT
MB04S6NCGF ROTARY SWITCH-4POSITIONS, DP4T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT
相关代理商/技术参数
参数描述
MA10L3NZGF 制造商:C&K Components 功能描述:- Bulk 制造商:C&K Components 功能描述:SWITCH ROTARY 制造商:C&K Components 功能描述:MA10L3NZGF
MA10L3NZQD 制造商:C&K Components 功能描述:Switch Rotary SP10T 10 Round Shaft Solder Lug 0.25A 125VAC 28VDC
MA10LS 制造商:EDSYN 功能描述:MAGNIFIER HEADBAND A/S 制造商:EDSYN 功能描述:MAGNIFIER, HEADBAND, A/S 制造商:EDSYN 功能描述:MAGNIFIER, HEADBAND, 2.5X; For Use With:PCB Rework Assembly Schematics Technical Drawings; Magnification:2.5X ;RoHS Compliant: NA
MA10S1NCGD 功能描述:旋钮开关 Rotary RoHS:否 制造商:C&K Components 位置数量:5 卡片组数量: 每卡片组极数:2 电流额定值:250 mA 电压额定值:125 V 指数角: 触点类型: 触点形式:DPST 端接类型:Solder 安装类型:Panel 触点电镀:Silver
MA10S1NCGF 制造商:ITT 制造商全称:ITT Industries 功能描述:Half-inch Rotary Switches