- 您现在的位置：买卖IC网 > PDF目录241060 > MA4E1318 GALLIUM ARSENIDE, mm WAVE BAND, MIXER DIODE PDF资料下载
参数资料
| 型号： | MA4E1318 |
| 元件分类： | 参考电压二极管 |
| 英文描述： | GALLIUM ARSENIDE, mm WAVE BAND, MIXER DIODE |
| 封装： | CASE 1197, FLIP CHIP-2 |
| 文件页数： | 4/7页 |
| 文件大小： | 134K |
| 代理商： | MA4E1318 |
4
GaAs Flip Chip Schottky Barrier Diodes
M/A-COM Products
Rev. V5
MA4E1317, MA4E1318, MA4E1319-1,
MA4E1319-2, MA4E2160
ADVANCED: Data Sheets contain information regarding a product MA-COM Technical Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product MA-COM Technical
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be avail-
able. Commitment to produce in volume is not guaranteed.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
MA-COM Technical Solutions and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice.
Mounting Techniques
These chips were designed to be inserted onto hard or soft substrates with the junction side down. They can be
mounted with conductive epoxy or with a low temperature solder preform. The die can also be assembled with
the junction side up, and wire or ribbon bonds made to the pads.
Solder Die Attach:
Solder which does not scavenge gold, such as Indalloy # 2, is recommended. Sn-Pb based solders are not rec-
ommended due to solder embrittlement. Do not expose die to a temperature greater than 235°C, or greater than
200°C for longer than 10 seconds. No more than three seconds of scrubbing should be required for attachment.
Epoxy Die Attach:
Assembly can be preheated to 125 - 150°C. Use a minimum amount of epoxy. Cure epoxy as per manufac-
turer’s schedule. For extended cure times, temperatures should be kept below 200°C.
Handling Procedures
The following precautions should be observed to avoid damaging these chips:
Cleanliness:
The chips should be handled in a clean environment.
Do not attempt to clean die after installation.
Static Sensitivity: Schottky barrier diodes are ESD sensitive and can be damaged by static
electricity. Proper ESD techniques should be used when handling these devices.
General Handling: The protective polymer coating on the active areas of these die provides scratch
protection, particularly for the metal air bridge which contacts the anode. Die can
be handled with tweezers or vacuum pickups and are suitable for use with
automatic pick-and-place equipment.
相关PDF资料 |
PDF描述 |
|---|---|
| MA4P505-255 | SILICON, PIN DIODE |
| MA4P607-296 | SILICON, PIN DIODE |
| MA4P303-111 | SILICON, PIN DIODE |
| MMBZ5234C | 6.2 V, 0.3 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, TO-236AB |
| MA44663B-30 | K BAND, 20 GHz, SILICON, STEP RECOVERY DIODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MA4E1319-1 | 功能描述:肖特基二极管与整流器 RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
| MA4E1319-2 | 制造商:M/A-COM Technology Solutions 功能描述:RF SCHOTTKY DIODE |
| MA4E1338 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Silicon Medium Barrier Schottky Diodes |
| MA4E1338_V7 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Silicon Medium Barrier Schottky Diodes |
| MA4E1338A1-1141T | 功能描述:肖特基二极管与整流器 RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。