- 您现在的位置：买卖IC网 > PDF目录133543 > MADP-042305-13060T SILICON, PIN DIODE PDF资料下载
参数资料
| 型号： | MADP-042305-13060T |
| 元件分类： | PIN二极管 |
| 英文描述： | SILICON, PIN DIODE |
| 封装： | ROHS COMPLIANT PACKAGE-2 |
| 文件页数： | 4/4页 |
| 文件大小： | 135K |
| 代理商： | MADP-042305-13060T |
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.
SURMOUNTTM PIN Diodes:
RoHS
M/A-COM Products
Rev. V5
MADP-042XX5-13060 Series
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
Handling Procedures
All semiconductor chips should be handled with care to avoid damage or contamination from perspiration and skin oils. The
use of plastic tipped tweezers or vacuum pickups is strongly recommended for individual components. Bulk handling should
insure that abrasion and mechanical shock are minimized.
Bonding Techniques
Attachment to a circuit board is made simple through the use of surface mount technology. Mounting pads are conveniently
located on the bottom surface of these devices and are removed from the active junction locations. These devices are well
suited for solder attachment onto hard and soft substrates. The use of 80Au/20Sn, or RoHS compliant solders is
recommended. For applications where the average power is ~1W, conductive silver epoxy may also be used. Cure per
manufacturers recommended time and temperature. Typically 1 hour at 150°C.
When soldering these devices to a hard substrate, hot gas die bonding is preferred. A vacuum tip pick-up tool and a force of
60 to100 grams applied to the top surface of the device is recommended. When soldering to soft substrates, such as Duroid, it
is recommended to use a soft solder at the circuit board to mounting pad interface. Position the die so that its mounting pads
are aligned with the circuit board mounting pads. While applying a downward force perpendicular to the top surface of the die,
apply heat near the circuit trace and diode mounting pad. The solder connection to the two pads should not be made one at a
time as this will create unequal heat flow and thermal stress to the part. Solder reflow should not be performed by causing heat
to flow through the top surface of the die to the back. Since the HMIC glass is transparent, the edges of the mounting pads
can be visually inspected through the die after attachment is completed.
Typical re-flow profiles for Sn60/Pb40 and RoHS compliant solders is provided in Application Note M538 , “Surface Mounting
Instructions“ and can viewed on the MA-COM website @ www.macom.com
Ordering Information
The MADP-042XX5-13060 series of surmounts may be ordered in either gel packs or tape and reeled by adding the
appropriate suffix per the table below. Tape and reel dimensions are provided in Application Note M513 located on the
M/A-COM website @ www.macom.com
.
Part Number
Gel Pack
Tape and Reel
Surf Tape
Pocket Tape
MADP-042305-13060G
MADP-042305-13060T
MADP-042305-13060P
MADP-042405-13060G
MADP-042405-13060T
MADP-042405-13060P
MADP-042505-13060G
MADP-042505-13060T
MADP-042505-13060P
MADP-042905-13060G
MADP-042905-13060T
MADP-042905-13060P
相关PDF资料 |
PDF描述 |
|---|---|
| MPG06B/4 | 1 A, 100 V, SILICON, SIGNAL DIODE |
| MQUPT48TR7E3 | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA |
| MSPUPT10E3 | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA |
| MVUPT8 | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA |
| MXUPT24 | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MADP-042308-13060 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:SURMOUNTTM 8μM PIN Diodes |
| MADP-042308-13060G | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:SURMOUNTTM 8μM PIN Diodes |
| MADP-042308-13060P | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:SURMOUNTTM 8μM PIN Diodes |
| MADP-042308-13060T | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:SURMOUNTTM 8μM PIN Diodes |
| MADP042405-1306 | 制造商:M/A-COM Technology Solutions 功能描述:RF PIN DIODE |
发布紧急采购，3分钟左右您将得到回复。