- 您现在的位置：买卖IC网 > PDF目录2007 > MAX1063AEEG+ (Maxim Integrated Products)IC ADC 10BIT 250KSPS 24-QSOP PDF资料下载
参数资料
| 型号： | MAX1063AEEG+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 20/20页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT 250KSPS 24-QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 位数： | 10 |
| 采样率（每秒）： | 250k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 762mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 24-QSOP |
| 包装： | 管件 |
| 输入数目和类型： | 4 个单端，单极；4 个单端，双极；2 个伪差分，单极；2 个伪差分，双极 |
Detailed Description
Converter Operation
The MAX1061/MAX1063 ADCs use a successive-
approximation (SAR) conversion technique and an
input track/hold (T/H) stage to convert an analog input
signal to a 10-bit digital output. Their parallel (8 + 2)
output format provides an easy interface to standard
microprocessors (Ps). Figure 2 shows the simplified
internal architecture of the MAX1061/MAX1063.
Single-Ended and
Pseudo-Differential Operation
The sampling architecture of the ADC’s analog com-
parator is illustrated in the equivalent input circuit in
Figure 3. In single-ended mode, IN+ is internally
switched to channels CH0–CH7 for the MAX1061
(Figure 3a) and to CH0–CH3 for the MAX1063 (Figure
3b), while IN- is switched to COM (Table 3).
In differential mode, IN+ and IN- are selected from ana-
log input pairs (Table 4) and are internally switched to
either of the analog inputs. This configuration is pseudo-
differential in that only the signal at IN+ is sampled. The
return side (IN-) must remain stable within ±0.5 LSB
(±0.1 LSB for best performance) with respect to GND
during a conversion. To accomplish this, connect a
0.1F capacitor from IN- (the selected input) to GND.
During the acquisition interval, the channel selected as
the positive input (IN+) charges capacitor CHOLD. At
the end of the acquisition interval, the T/H switch
opens, retaining charge on CHOLD as a sample of the
signal at IN+.
The conversion interval begins with the input multiplex-
er switching CHOLD from the positive input (IN+) to the
negative input (IN-). This unbalances node zero at the
comparator’s positive input. The capacitive digital-to-
analog converter (DAC) adjusts during the remainder of
the conversion cycle to restore node 0 to 0V within the
limits of 10-bit resolution. This action is equivalent to
transferring a 12pF[(VIN+) - (VIN-)] charge from CHOLD
to the binary-weighted capacitive DAC, which in turn
forms a digital representation of the analog input signal.
MAX1061/MAX1063
250ksps, +3V, 8-/4-Channel, 10-Bit ADCs
with +2.5V Reference and Parallel Interface
_______________________________________________________________________________________
9
T/H
TRI-STATE, BIDIRECTIONAL
I/O INTERFACE
10
17k
8
2
8
2
8
SUCCESSIVE-
APPROXIMATION
REGISTER
MUX
CHARGE REDISTRIBUTION
10-BIT DAC
CLOCK
( ) ARE FOR MAX1061 ONLY.
ANALOG
INPUT
MULTIPLEXER
CONTROL LOGIC
AND
LATCHES
REF
REFADJ
1.22V
REFERENCE
D0–D7
8-BIT DATA BUS
(CH5)
(CH4)
(CH7)
(CH6)
CH3
CH2
CH1
CH0
COM
CLK
CS
WR
RD
VDD
HBEN
GND
VLOGIC
MAX1061
MAX1063
AV =
2.05
COMP
INT
Figure 2. Simplified Internal Architecture for 8-/4-Channel MAX1061/MAX1063
相关PDF资料 |
PDF描述 |
|---|---|
| MAX107ECS+ | IC ADC 6BIT 400MSPS DL 80-TQFP |
| MAX1080AEUP+ | IC ADC 10BIT 400KSPS 20-TSSOP |
| MAX1084AESA+ | IC ADC 10BIT 400KSPS 8-SOIC |
| MAX1093AEEG+ | IC ADC 10BIT 250KSPS 24-QSOP |
| MAX1098CEAE+ | IC ADC 10BIT SERIAL 16-SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1063AEEG+ | 功能描述:模数转换器 - ADC 3V 10Bit 4Ch 400ksps w/2.5V Ref & Prl Int RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1063AEEG+T | 功能描述:模数转换器 - ADC 3V 10Bit 4Ch 400ksps w/2.5V Ref & Prl Int RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1063AEEG-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1063BCEG | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1063BCEG+ | 功能描述:模数转换器 - ADC 3V 10Bit 4Ch 400ksps w/2.5V Ref & Prl Int RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。