- 您现在的位置：买卖IC网 > PDF目录9882 > MAX11048ECB+T (Maxim Integrated Products)IC ADC 16BIT PAR 250KSPS 64TQFP PDF资料下载
参数资料
| 型号： | MAX11048ECB+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 17/25页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT PAR 250KSPS 64TQFP |
| 标准包装： | 750 |
| 位数： | 16 |
| 采样率（每秒）： | 250k |
| 数据接口： | 并联 |
| 转换器数目： | 6 |
| 功率耗散（最大）： | 3.48W |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | * |
| 封装/外壳： | * |
| 供应商设备封装： | * |
| 包装： | * |
| 输入数目和类型： | 6 个单端，单极 |
MAX11047–MAX11049/MAX11057–MAX11059
4-/6-/8-Channel, 16-/14-Bit,
Simultaneous-Sampling ADCs
24
______________________________________________________________________________________
Spurious-Free Dynamic Range (SFDR)
SFDR is the ratio of the RMS amplitude of the funda-
mental (maximum signal component) to the RMS value
of the next-largest frequency component.
Aperture Delay
Aperture delay (tAD) is the time delay from the sampling
clock edge to the instant when an actual sample is taken.
Aperture Jitter
Aperture Jitter (tAJ) is the sample-to-sample variation in
aperture delay.
Channel-to-Channel Isolation
Channel-to-channel isolation indicates how well each
analog input is isolated from the other channels. Channel-
to-channel isolation is measured by applying DC to chan-
nels 1 to 7, while a -0.4dBFS sine wave at 60Hz is applied
to channel 0. A 10ksps FFT is taken for channel 0 and
channel 1. Channel-to-channel isolation is expressed in
dB as the power ratio of the two 60Hz magnitudes.
Small-Signal Bandwidth
A small -20dBFS analog input signal is applied to an
ADC in a manner that ensures that the signal’s slew
rate does not limit the ADC’s performance. The input
frequency is then swept up to the point where the
amplitude of the digitized conversion result has
decreased 3dB.
Full-Power Bandwidth
A large -0.5dBFS analog input signal is applied to an
ADC, and the input frequency is swept up to the point
where the amplitude of the digitized conversion result
has decreased by 3dB. This point is defined as full-
power input bandwidth frequency.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN NO.
56 TQFN-EP
T5688+2
64 TQFP-EP
C64E+6
Package Information
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
Chip Information
PROCESS: BiCMOS
相关PDF资料 |
PDF描述 |
|---|---|
| MS3106E28-21SY | CONN PLUG 37POS STRAIGHT W/SCKT |
| MAX110BEWE+ | IC ADC 14BIT 2CH 16-SOIC |
| MAX11048ETN+T | IC ADC 16BIT 250KSPS SAR 56TQFN |
| MS3106E28-21SX | CONN PLUG 37POS STRAIGHT W/SCKT |
| MS3106E28-21SW | CONN PLUG 37POS STRAIGHT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX11048ETN+ | 功能描述:模数转换器 - ADC 16Bit 6Ch Simult Sampling RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11048ETN+T | 功能描述:模数转换器 - ADC 16Bit 6Ch Simult Sampling RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11049 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:4-/6-/8-Channel, 16-Bit, Simultaneous-Sampling ADCs |
| MAX11049ECB+ | 功能描述:模数转换器 - ADC 16Bit 8Ch Simult Sampling RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11049ECB+T | 功能描述:模数转换器 - ADC 16Bit 8Ch Simult Sampling RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。