参数资料
| 型号： | MAX1106EUB+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/16页 |
| 文件大小： | 0K |
| 描述： | IC ADC 8BIT LP 10-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 位数： | 8 |
| 采样率（每秒）： | 25k |
| 数据接口： | MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 290µW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 2 个单端，单极；1 个伪差分，单极 |
MAX1106/MAX1107
Single-Supply, Low-Power,
Serial 8-Bit ADCs
______________________________________________________________________________________
15
Layout, Grounding, and Bypassing
For best performance, use printed circuit boards. Wire-
wrap boards are not recommended. Board layout
should ensure that digital and analog signal lines are
separated from each other. Do not run analog and digi-
tal (especially clock) lines parallel to one another or run
digital lines underneath the ADC package.
Figure 10 shows the recommended system-ground
connections. A single-point analog ground (star-ground
point) should be established at the A/D ground.
Connect all analog grounds to the star ground. No digi-
tal-system ground should be connected to this point.
The ground return to the power supply for the star
ground should be low impedance and as short as pos-
sible for noise-free operation.
High-frequency noise in the VDD power supply may
affect the comparator in the ADC. Bypass the supply to
the star ground with 0.1F and 1F capacitors close to
the VDD pin of the MAX1106/MAX1107. Minimize
capacitor lead lengths for best supply-noise rejection. If
the power supply is very noisy, a 10
resistor can be
connected to form a lowpass filter.
GND
+3V/+5V
SYSTEM POWER SUPPLIES
VDD
DGND
VDD
IN-
1
F
10
0.1
F
GND
DIGITAL
CIRCUITRY
MAX1106
MAX1107
Figure 10. Power-Supply Connections
Chip Information
TRANSISTOR COUNT: 2373
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1108EUB+TG07 | IC ADC 8BIT SPI/SRL 50K 10UMAX |
| MAX110AEWE+ | IC ADC 14BIT 2CH 16-SOIC |
| MAX11131ATI+ | IC ADC 12BIT SRL 28-TQFN-EP |
| MAX1118EKA+T | IC ADC 8-BIT 100KSPS SOT23-8 |
| MAX11205BEUB+T | IC ADC 16BIT SRL 13.75SPS 10UMAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1106-MAX1107 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single-Supply, Low-Power, Serial 8-Bit ADCs |
| MAX1107 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single-Supply, Low-Power, Serial 8-Bit ADCs |
| MAX1107CUB | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1107CUB+ | 功能描述:模数转换器 - ADC Single-Supply Low-P Serial 8-Bit RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1107CUB+T | 功能描述:模数转换器 - ADC Single-Supply Low-P Serial 8-Bit RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。