- 您现在的位置：买卖IC网 > PDF目录17010 > MAX11635EVKIT+ (Maxim Integrated Products)KIT EVAL FOR 12-BIT ADCS 4-CH PDF资料下载
参数资料
| 型号： | MAX11635EVKIT+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 13/24页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR 12-BIT ADCS 4-CH |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 系列： | * |
MAX11634–MAX11637
12-Bit, 300ksps ADCs with Differential
Track/Hold, and Internal Reference
20
______________________________________________________________________________________
Internally Timed Acquisitions and
Conversions Using the Serial Interface
Performing Conversions in Clock Mode 10
In clock mode 10, the wake-up, acquisition, conversion,
and shutdown sequences are initiated by writing an
input data byte to the conversion register, and are per-
formed automatically using the internal oscillator. This is
the default clock mode upon power-up. See Figure 6
for clock mode 10 timing.
Initiate a scan by writing a byte to the conversion regis-
ter. The MAX11634–MAX11637 then power up, scan all
requested channels, store the results in the FIFO, and
shut down. After the scan is complete, EOC is pulled
low and the results are available in the FIFO. EOC stays
low until CS is pulled low again.
Externally Clocked Acquisitions and
Conversions Using the Serial Interface
Performing Conversions in Clock Mode 11
In clock mode 11, acquisitions and conversions are ini-
tiated by writing to the conversion register and are per-
formed one at a time using the SCLK as the conversion
clock. Scanning and averaging are disabled, and the
conversion result is available at DOUT during the con-
version. See Figure 7 for clock mode 11 timing.
Initiate a conversion by writing a byte to the conversion
register followed by 16 SCLK cycles. If CS is pulsed
high between the eighth and ninth cycles, the pulse
width must be less than 100s. To continuously convert
at 16 cycles per conversion, alternate 1 byte of zeros
between each conversion byte.
CS
DOUT
SCLK
CNVST
EOC
(CONVERSION2)
MSB1
LSB1
MSB2
(ACQUISITION1)
(ACQUISITION2)
(CONVERSION1)
REQUEST MULTIPLE CONVERSIONS BY SETTING CNVST LOW FOR EACH CONVERSION.
Figure 5. Clock Mode 01
(UP TO 514 INTERNALLY CLOCKED ACQUISITIONS AND CONVERSIONS)
MSB1
LSB1
MSB2
(CONVERSION BYTE)
CS
DOUT
SCLK
DIN
EOC
THE CONVERSION BYTE BEGINS THE ACQUISITION. CNVST IS NOT REQUIRED.
Figure 6. Clock Mode 10
相关PDF资料 |
PDF描述 |
|---|---|
| GMC13DREI | CONN EDGECARD 26POS .100 EYELET |
| VE-B2Y-EY | CONVERTER MOD DC/DC 3.3V 33W |
| MAX11617EVKIT+ | KIT EVALUATION FOR MAX11617 |
| PCM16XL0 | PROCESSOR MODULE FOR MPLAB-ICE |
| ECE-V1CA331P | CAP ALUM 330UF 16V 20% SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX11635EVKIT+ | 功能描述:数据转换 IC 开发工具 MAX11635 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX11635EVSYS# | 功能描述:数据转换 IC 开发工具 MAX11635 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX11636 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:12-Bit, 300ksps ADCs with Differential |
| MAX11636EEE+ | 功能描述:模数转换器 - ADC 8Ch 12-Bit 300ksps w/FIFO & Int Ref RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11636EEE+T | 功能描述:模数转换器 - ADC 8Ch 12-Bit 300ksps w/FIFO & Int Ref RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。