- 您现在的位置：买卖IC网 > PDF目录9873 > MAX1166BEUP+T (Maxim Integrated Products)IC ADC 16BIT 165KSPS 20-TSSOP PDF资料下载
参数资料
| 型号： | MAX1166BEUP+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/15页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT 165KSPS 20-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 位数： | 16 |
| 采样率（每秒）： | 165k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 16mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 1 个单端，单极 |
MAX1165/MAX1166
Selecting Standby or Shutdown Mode
The MAX1165/MAX1166 have a selectable standby or
low-power shutdown mode. In standby mode, the
ADC’s internal reference and reference buffer do not
power down between conversions, eliminating the need
to wait for the reference to power up before performing
the next conversion. Shutdown mode powers down the
reference and reference buffer after completing a con-
version. The reference and reference buffer require a
minimum of 10ms (CREFADJ = 0.1F, CREF = 4.7F) to
power up and settle from shutdown.
The state of R/C at the second falling edge of CS
selects which power-down mode the MAX1165/
MAX1166 enter upon conversion completion. Holding
R/C low causes the MAX1165/MAX1166 to enter stand-
by mode. The reference and buffer are left on after the
conversion completes. R/C high causes the MAX1165/
MAX1166 to enter shutdown mode and shut down the
reference and buffer after conversion (Figures 5 and 6).
When using an external reference, set the REF power-
down bit high for lowest current operation.
Standby Mode
While in standby mode, the supply current is reduced
to less than 1mA (typ). The next falling edge of CS with
R/C low causes the MAX1165/MAX1166 to exit standby
mode and begin acquisition. The reference and refer-
ence buffer remain active to allow quick turn-on time.
Standby mode allows significant power savings while
running at the maximum sample rate.
Shutdown Mode
In shutdown mode, the reference and reference buffer
are shut down between conversions. Shutdown mode
reduces supply current to 0.5A (typ) immediately after
the conversion. The falling edge of CS with R/C low
causes the reference and buffer to wake up and enter
acquisition mode. To achieve 16-bit accuracy, allow
10ms (CREFADJ = 0.1F, CREF = 4.7F) for the internal
reference to wake up.
Internal and External Reference
Internal Reference
The internal reference of the MAX1165/MAX1166 is
internally buffered to provide +4.096V output at REF.
Bypass REF to AGND and REFADJ to AGND with 4.7F
and 0.1F, respectively.
Fine adjustments can be made to the internal reference
voltage by sinking or sourcing current at REFADJ. The
input impedance of REFADJ is nominally 5k. The
internal reference voltage is adjustable to ±1.5% with
the circuit of Figure 7.
External Reference
An external reference can be placed at either the input
(REFADJ) or the output (REF) of the MAX1165/
MAX1166s’ internal buffer amplifier. When connecting an
Low-Power, 16-Bit Analog-to-Digital Converter
with Parallel Interface
10
______________________________________________________________________________________
CS
REF
AND
BUFFER
REF POWER-
DOWN BIT
ACQUISITION
CONVERSION
DATA
OUT
R/C
EOC
Figure 5. Selecting Standby Mode
REF POWER-
DOWN BIT
ACQUISITION
CONVERSION
DATA
OUT
CS
REF
AND
BUFFER
R/C
EOC
Figure 6. Selecting Shutdown Mode
MAX1165
MAX1166
REFADJ
+5V
100k
150k
68k
0.1F
Figure 7. MAX1165/MAX1166 Reference Adjust Circuit
相关PDF资料 |
PDF描述 |
|---|---|
| V300A24T500BF2 | CONVERTER MOD DC/DC 24V 500W |
| V300A15T500BL2 | CONVERTER MOD DC/DC 15V 500W |
| MAX156AEWI+T | IC ADC 8BIT 4CH T/H&REF 28-SOIC |
| V300A15T500BF3 | CONVERTER MOD DC/DC 15V 500W |
| MAX145AEPA+ | IC ADC 12BIT 108KSPS 8-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1166CCUP | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1166CCUP-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1166CEUP | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1166CEUP-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1167 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
发布紧急采购，3分钟左右您将得到回复。