- 您现在的位置：买卖IC网 > PDF目录9828 > MAX1177ACUP+ (Maxim Integrated Products)IC ADC 16BIT 135KSPS 20-TSSOP PDF资料下载
参数资料
| 型号： | MAX1177ACUP+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT 135KSPS 20-TSSOP |
| 标准包装： | 74 |
| 位数： | 16 |
| 采样率（每秒）： | 135k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 879mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 输入数目和类型： | 1 个单端，单极 |
MAX1177
16-Bit, 135ksps, Single-Supply ADC
with to 10V Input Range
6
_______________________________________________________________________________________
Pin Description
PIN
NAME
FUNCTION
1
D4/D12
Tri-State Digital-Data Output
2
D5/D13
Tri-State Digital-Data Output
3
D6/D14
Tri-State Digital-Data Output
4
D7/D15
Tri-State Digital-Data Output. D15 is the MSB.
5R/
C
Read/Convert Input. Power up and put the device in acquisition mode by holding R/
C low during the
first falling edge of
CS. During the second falling edge of CS, the level on R/C determines whether the
reference and reference buffer power down or remain on after conversion. Set R/
C high during the
second falling edge of
CS to power down the reference and buffer, or set R/C low to leave the
reference and buffer powered up. Set R/
C high during the third falling edge of CS to put valid data on
the bus.
6
EOC
End of Conversion.
EOC drives low when conversion is complete.
7AVDD
Analog Supply Input. Bypass with a 0.1F capacitor to AGND.
8
AGND
Analog Ground. Primary analog ground (star ground).
9
AIN
Analog Input
10
AGND
Analog Ground. Connect pin 10 to pin 8.
11
REFADJ
Reference Buffer Output. Bypass REFADJ with a 0.1F capacitor to AGND for internal reference
mode. Connect REFADJ to AVDD to select external reference mode.
12
REF
Reference Input/Output. Bypass REF with a 10F capacitor to AGND for internal reference mode.
External reference input when in external reference mode.
13
HBEN
High-Byte Enable Input. Used to multiplex the 16-bit conversion result.
1: MSB available on the data bus.
0: LSB available on the data bus.
14
CS
Convert Start. The first falling edge of
CS powers up the device and enables acquire mode when R/C
is low. The second falling edge of
CS starts the conversion. The third falling edge of CS loads the
result onto the bus when R/
C is high.
15
DGND
Digital Ground
16
DVDD
Digital Supply Voltage. Bypass with a 0.1F capacitor to DGND.
17
D0/D8
Tri-State Digital-Data Output. D0 is the LSB.
18
D1/D9
Tri-State Digital-Data Output
19
D2/D10
Tri-State Digital-Data Output
20
D3/D11
Tri-State Digital-Data Output
相关PDF资料 |
PDF描述 |
|---|---|
| MAX13089ECSD+T | IC TXRX RS485/RS422 14-SOIC |
| VE-J6D-MX-F4 | CONVERTER MOD DC/DC 85V 75W |
| MAX1178ACUP+ | IC ADC 16BIT 135KSPS 20-TSSOP |
| MS27484E22A55PB | CONN PLUG 55POS STRAIGHT W/PINS |
| MAX1189ACUI+ | IC ADC 16BIT 135KSPS 28-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1177ACUP+ | 功能描述:模数转换器 - ADC 16-Bit 135ksps 4.2V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1177ACUP+T | 功能描述:模数转换器 - ADC 16-Bit 135ksps 4.2V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1177ACUP-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1177AEUP | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1177AEUP+ | 功能描述:模数转换器 - ADC 16-Bit 135ksps 4.2V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。