- 您现在的位置：买卖IC网 > PDF目录383316 > MAX1267BEEG (MAXIM INTEGRATED PRODUCTS INC) 265ksps, +3V, 6-/2-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface PDF资料下载
参数资料
| 型号： | MAX1267BEEG |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | ADC |
| 英文描述： | 265ksps, +3V, 6-/2-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface |
| 中文描述： | 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO24 |
| 封装： | 0.150 INCH, 0.025 INCH PITCH, MO-137, QSOP-24 |
| 文件页数： | 13/19页 |
| 文件大小： | 307K |
| 代理商： | MAX1267BEEG |
M
265ksps, +3V, 6-/2-Channel, 12-Bit ADCs
with +2.5V Reference and Parallel Interface
______________________________________________________________________________________
13
External Clock Mode
To select the external clock mode, bits D6 and D7 of
the control byte must be set to 1. Figure 6 shows the
clock and
WR
timing relationship for internal (Figure 6a)
and external (Figure 6b) acquisition modes with an
external clock. For proper operation, a 100kHz to
4.8MHz clock frequency with 30% to 70% duty cycle is
recommended. Operating the MAX1265/MAX1267 with
clock frequencies lower than 100kHz is not recommend-
ed, because the resulting voltage droop across the hold
capacitor in the T/H stage degrades performance.
Digital Interface
The input and output data are multiplexed on a tri-state
parallel interface (I/O) that can easily be interfaced with
standard μPs. The signals
CS
,
WR
, and
RD
control the
write and read operations.
CS
represents the chip-
Figure 6a. External Clock and
WR
Timing (Internal Acquisition Mode)
Figure 6b. External Clock and
WR
Timing (External Acquisition Mode)
WR
CLK
CLK
WR
WR GOES HIGH WHEN CLK IS HIGH.
WR GOES HIGH WHEN CLK IS LOW.
t
CWS
t
CH
t
CL
t
CP
t
CWH
ACQUISITION STARTS
ACQUISITION STARTS
CONVERSION STARTS
CONVERSION STARTS
ACQUISITION ENDS
ACQUISITION ENDS
ACQMOD = 0
ACQMOD = 0
WR
CLK
CLK
WR
WR GOES HIGH WHEN CLK IS HIGH
WR GOES HIGH WHEN CLK IS LOW
t
DH
t
DH
t
CWH
t
CWS
ACQUISITION STARTS
ACQUISITION STARTS
CONVERSION STARTS
CONVERSION STARTS
ACQUISITION ENDS
ACQUISITION ENDS
ACQMOD = 1
ACQMOD = 1
ACQMOD = 0
ACQMOD = 0
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1270AENG | LJT 18C 18#16 PIN PLUG |
| MAX1270BCNG | Multirange, +5V, 8-Channel, Serial 12-Bit ADCs |
| MAX1271BCNG | Multirange, +5V, 8-Channel, Serial 12-Bit ADCs |
| MAX1270BENG | Multirange, +5V, 8-Channel, Serial 12-Bit ADCs |
| MAX1271BENG | Multirange, +5V, 8-Channel, Serial 12-Bit ADCs |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1267BEEG+ | 功能描述:模数转换器 - ADC 12-Bit 2Ch 265ksps 3.6V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1267BEEG+T | 功能描述:模数转换器 - ADC 12-Bit 2Ch 265ksps 3.6V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1267BEEG-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1268ACEG | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1268ACEG+ | 功能描述:模数转换器 - ADC 12-Bit 2Ch 420ksps 5.5V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。