- 您现在的位置：买卖IC网 > PDF目录1935 > MAX13037ATX+T (Maxim Integrated Products)IC AUTO CONTACT MONITOR 36-TQFN PDF资料下载
参数资料
| 型号： | MAX13037ATX+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/22页 |
| 文件大小： | 0K |
| 描述： | IC AUTO CONTACT MONITOR 36-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 应用： | 自动 |
| 接口： | SPI |
| 电源电压： | 6 V ~ 26 V |
| 封装/外壳： | 36-WFQFN 裸露焊盘 |
| 供应商设备封装： | 36-TQFN 裸露焊盘（6x6） |
| 包装： | 带卷 (TR) |
| 安装类型： | 表面贴装 |
MAX13037/MAX13038
at which point the command register is restored to its
power-up default (0x00) and the MAX13037/
MAX13038 enter scan mode. Note that
SD is compati-
ble with both logic and BAT voltage levels. Having
SD
compatible to VBAT allows the MAX13037/MAX13038 to
retain the settings in the command register as well as
input monitoring even when VLO is disabled, provided
that
SD = VBAT.
Applications Information
Automotive Considerations
Reverse-Battery Tolerance
The BATREF and IN0–IN7 inputs can withstand voltages
down to -45V without damage so that reverse battery is
not an issue. The BAT input should be protected with a
reverse-battery diode as shown in the
Typical Application
Circuit. The shutdown (
SD) and REGON inputs can be
controlled from a battery-level source, but should be pro-
tected against reverse battery in the application.
Power Dissipation
Wetting currents and the LDO output current can result in
overheating the MAX13037/MAX13038. At the early ther-
mal warning threshold of +135°C (typ), wetting currents
are disabled. This allows the LDO output to remain
enabled if overheating is caused by the wetting currents.
At temperatures above +170°C, the LDO is also turned
off to avoid damage to the device.
It is important to consider the effects of wetting currents
on the power dissipated by the MAX13037/MAX13038.
For example, assume all inputs are configured for a
continuous wetting current of 25mA, all external switch-
es have an on-resistance of 1Ω and the battery voltage
is +16V. If all switches are simultaneously closed, the
corresponding power dissipated due to wetting currents
only is (16V - (25mA x 1Ω)) x 25mA x 8 = 3.12W, which
is higher than the absolute maximum power dissipation
of 2857mW at +70°C.
The LDO is a second source of power dissipation. For
example, if VLO = +3.3V, ILO = 100mA and VBAT =
+16V, the power dissipated by the LDO is (16V - 3.3V)
+ (0.1) = 1.27W. Both the LDO and wetting currents
should be taken into account for correct use of the
MAX13037/MAX13038.
ESD Protection
As with all Maxim devices, ESD-protection structures
are incorporated on all pins to protect against electro-
static discharges encountered during handling and
assembly. The IN7–IN0 inputs have extra protection
against static electricity. Maxim’s engineers have
developed state-of-the-art structures to protect these
pins against ESD of ±8kV without damage.
Human Body Model
The MAX13037/MAX13038 IN7–IN0 pins are charac-
terized for ±8kV ESD protection using the Human
Body Model. Figure 7a shows the Human Body Model,
and Figure 7b shows the current waveform it gener-
ates when discharged into a low impedance. This
model consists of a 100pF capacitor charged to the
ESD voltage of interest, which is then discharged into
the device through a 1.5kΩ resistor.
Automotive Contact Monitor and
Level Shifters with LDO Regulator
18
______________________________________________________________________________________
CHARGE-CURRENT-
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
100pF
RC 1M
Ω
RD 1500
Ω
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
Figure 7a. Human Body ESD Test Model
IP 100%
90%
36.8%
tRL
TIME
tDL
CURRENT WAVEFORM
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
Ir
10%
0
AMPERES
Figure 7b. Human Body Model Current Waveform
相关PDF资料 |
PDF描述 |
|---|---|
| MAX13041ASD/V+T | IC CAN TXRX +/-80V HS 14SOIC |
| MAX13051ASA+ | IC TRANSCEIVER CAN 8-SOIC |
| MAX13054ASA+T | IC TRANSCEIVER CAN HS 8-SOIC |
| MAX13087ECPA+ | IC TXRX RS485/422 5V ESD 8-DIP |
| MAX13174ECAG+ | IC CBL TERMINATION NETWRK 24SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX13038ATI+ | 功能描述:接口 - 专用 Auto Contact Monitor & Level Shift w/LDO RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX13038ATI+T | 制造商:Maxim Integrated Products 功能描述:AUTOMOTIVE CONTACT MONITOR AND LEVE - Tape and Reel |
| MAX13038ATX+ | 功能描述:接口 - 专用 Auto Contact Monitor & Level Shift w/LDO RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX13038ATX+T | 功能描述:接口 - 专用 Auto Contact Monitor & Level Shift w/LDO RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX1303AEUP | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。