- 您现在的位置：买卖IC网 > PDF目录8847 > MAX13042EETD+T (Maxim Integrated Products)IC LEVEL TRANSLATOR 14-TDFN PDF资料下载
参数资料
| 型号： | MAX13042EETD+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/14页 |
| 文件大小： | 0K |
| 描述： | IC LEVEL TRANSLATOR 14-TDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 逻辑功能： | 变换器，双向 |
| 位数： | 4 |
| 输入类型： | CMOS |
| 输出类型： | CMOS |
| 数据速率： | 100Mbps |
| 通道数： | 4 |
| 输出/通道数目： | 1 |
| 差分 - 输入:输出： | 无/无 |
| 传输延迟（最大）： | 6.5ns |
| 电源电压： | 2.2 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 14-WFDFN 裸露焊盘 |
| 供应商设备封装： | 14-TDFN-EP（3x3） |
| 包装： | 带卷 (TR) |
MAX13042E–MAX13045E
1.62V to 3.6V Improved High-Speed LLT
10
______________________________________________________________________________________
Shutdown Mode
The MAX13042E–MAX13045E feature an enable (EN)
input that places the devices into a low-power shutdown
mode when driven low. The MAX13042E–MAX13045E
feature an automatic shutdown mode that disables the
part when VCC is unconnected or less than VL.
Applications Information
Layout Recommendations
Use standard high-speed layout practices when
laying out a board with the MAX13042E–MAX13045E.
For example, to minimize line coupling, place all other
signal lines not connected to the MAX13042E–
MAX13045E at least 1x the substrate height of the
PCB away from the input and output lines of the
MAX13042E–MAX13045E.
Power-Supply Decoupling
To reduce ripple and the chance of introducing data
errors, bypass VL and VCC to ground with 0.1F ceram-
ic capacitors. Place all capacitors as close to the
power-supply inputs as possible. For full ESD protec-
tion, bypass VCC with a 1F ceramic capacitor located
as close to the VCC input as possible.
Unidirectional vs. Bidirectional
Level Translator
The MAX13042E–MAX13045E bidirectional level trans-
lators can operate as a unidirectional device to trans-
late signals without inversion. These devices provide
the smallest solution (UCSP package) for unidirectional
level translation without inversion.
ESD Test Conditions
ESD performance depends on a variety of conditions.
Contact Maxim for a reliability report that documents
test setup, test methodology, and test results.
Use with External Pullup/
Pulldown Resistors
Due to the architecture of the MAX13042E–MAX13045E,
it is not recommended to use external pullup or pull-
down resistors on the bus. In certain applications, the
use of external pullup or pulldown resistors is desired to
have a known bus state when there is no active driver
on the bus. The MAX13042E–MAX13045E include inter-
nal pullup current sources that set the bus state when
the device is enabled. In shutdown mode, the state of
I/O VCC_ and I/O VL_ is dependent on the selected part
version (see the Ordering Information/Selector Guide).
Open-Drain Signaling
The MAX13042E–MAX13045E are designed to pass open-
drain as well as CMOS push-pull signals. When used with
open-drain signaling, the rise time will be dominated by the
interaction of the internal pullup current source and the par-
asitic load capacitance. The MAX13042E–MAX13045E
include internal rise-time accelerators to speed up transi-
tions, eliminating any need for external pullup resistors. For
applications such as I2C or 1-wire that require an external
pullup resistor, please consult the MAX3378E and
MAX3396E data sheets.
UCSP Applications Information
For the latest application details on UCSP construction,
dimensions, tape carrier information, PCB techniques,
bump-pad layout, and recommended reflow temperature
profiles, as well as the latest information on reliability testing
results, go to Maxim’s website at www.maxim-ic.com/ucsp
to find the Application Note: UCSP – A Wafer-Level Chip-
Scale Package.
Chip Information
PROCESS: BiCMOS
30
μA
VL
ENABLE
VCC
30
μA
BOOST
CIRCUIT
I/O VL_
VL
VCC
BOOST
CIRCUIT
VCC
VL
I/O VCC_
NOTE: THE MAX13042E–MAX13045E ARE ENABLED WHEN
VL < VCC AND EN = VL.
Figure 4. Simplified Functional Diagram for One I/O Line
相关PDF资料 |
PDF描述 |
|---|---|
| GTC02R-32-1S | CONN RCPT 5POS BOX MNT W/SCKT |
| V110B15M200BG | CONVERTER MOD DC/DC 15V 200W |
| MAX13047EETB+T | IC TRANSLATOR DUAL CH 10-UTQFN |
| MAX3394EEBL+TG45 | TRANSLATOR OCTAL BIDIR 8UCSP |
| MAX3373EEKA/V+T | IC TRANSLATOR LEVEL SOT23-8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX13042EEVKIT+ | 功能描述:电源管理IC开发工具 MAX13042E Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX13043EEBC+ | 制造商:Maxim Integrated Products 功能描述:1.62V TO 3.6V IMPROVED HIGH-SPEED L - Rail/Tube 制造商:Rochester Electronics LLC 功能描述: |
| MAX13043EEBC+T | 功能描述:转换 - 电压电平 4Ch 100Mbps 3.2V RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
| MAX13043EETD+ | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX13043EETD+T | 功能描述:转换 - 电压电平 4Ch 100Mbps 3.2V RoHS:否 制造商:Micrel 类型:CML/LVDS/LVPECL to LVCMOS/LVTTL 传播延迟时间:1.9 ns 电源电流:14 mA 电源电压-最大:3.6 V 电源电压-最小:3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MLF-8 |
发布紧急采购，3分钟左右您将得到回复。