- 您现在的位置：买卖IC网 > PDF目录9858 > MAX13345EEBC+T (Maxim Integrated Products)IC TXRX USB FS 3WIRE 12-UCSP PDF资料下载
参数资料
| 型号： | MAX13345EEBC+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 16/18页 |
| 文件大小： | 0K |
| 描述： | IC TXRX USB FS 3WIRE 12-UCSP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | USB 2.0 |
| 电源电压： | 2.3 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-WFBGA，WLCSP |
| 供应商设备封装： | 12-UCSP（3x4） |
| 包装： | 带卷 (TR) |
MAX13342E/MAX13345E
3-Wire Interface Full-Speed USB Transceivers
With/Without Internal Series Resistors
_______________________________________________________________________________________
7
Pin Description
PIN
TDFN
UCSP
NAME
FUNCTION
1B1
VTRM
Regulated Output Voltage. VTRM provides a 3.3V output derived from VBUS. Bypass VTRM to GND
with a 1F (min) low-ESR capacitor, such as ceramic or plastic film types. VTRM provides power
to internal circuitry and the internal D+ pullup resistor. Do not use VTRM to power external
circuitry. These USB transceivers can also be powered by an externally regulated 3.3V supply
connected to both VBUS and VTRM.
2A1
VL
System-Side Power-Supply Input. Connect VL to the systems logic-level power supply. Bypass VL
to GND with a 0.1F (min) low-ESR ceramic capacitor.
3
A2
SE0
Logic-Side Data Input/Output. SE0 operates as an input when
OE is low and as an output when
OE is high. As an input, when SE0 is active high, D+ and D- are both driven low. As an output,
SE0 goes active high when both D+ and D- are low. (See Tables 3 and 4.)
4
A3
DAT
Logic-Side Data Input/Output. DAT operates as an input for data on D+/D- when
OE is low. DAT
operates as the output of the differential receiver on D+/D- when
OE is high. (See Tables 3 and 4.)
5, 12
—
N.C.
No Connection. Leave N.C. unconnected. N.C. is not internally connected.
6
B3
SUS
Suspend Input. Drive SUS low for normal transceiver operation. Drive SUS high for low-power
state.
7
A4
BD
USB Detector Output. A high on BD indicates that VBUS is present.
8B4
OE
Output Enable.
OE controls the USB transmitter outputs (D+/D-) and the interface signals (DAT,
SE0) when in USB mode. Drive
OE high to operate D+/D- as inputs and to operate the logic
interface signals as outputs. Drive
OE low to operate D+/D- as outputs and to operate the logic
interface signals as inputs.
9
C4
GND
Ground
10
C3
D-
Negative USB Differential Data Input/Output. D- is wired to the USB connector directly
(MAX13345E) or through a series resistor (MAX13342E). D- operates as an input when
OE is high
and as an output when
OE is low.
11
C2
D+
Positive USB Differential Data Input/Output. D+ is wired to the USB connector directly
(MAX13345E) or through a series resistor (MAX13342E). D+ operates as an input when
OE is
high and as an output when
OE is low.
13
B2
ENUM
Enumerate. Drive ENUM high to connect the internal 1.5k
resistor from D+ to VTRM. Drive ENUM
low to disconnect the internal 1.5k
resistor.
14
C1
VBUS
USB-Side Power-Supply Input. Connect VBUS to the incoming USB power supply. Bypass VBUS to
GND with a 1F ceramic capacitor.
EP
—
EP
Exposed Paddle. Connect EP to GND.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX13342EETD+T | IC TXRX USB FS 3WIRE 14-TDFN |
| MS3101F20-23S | CONN RCPT 2POS FREE HNG W/SCKT |
| MAX13345EETD+T | IC TXRX USB FS 3WIRE 14-TDFN |
| MS3101A20-24S | CONN RCPT 4POS FREE HNG W/SCKT |
| MS27474P14A18P | CONN RCPT 18POS JAM NUT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX13345EETD+T | 功能描述:USB 接口集成电路 Full-Speed 12Mbps USB Transceiver RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| MAX13362ATL/V+ | 功能描述:监控电路 Automotive Contact Monitor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX13362ATL/V+T | 功能描述:监控电路 Automotive Contact Monitor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX13362EVKIT+ | 功能描述:界面开发工具 Evaluation Kit for the MAX13362 RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| MAX13366GTE/V+ | 功能描述:板机接口霍耳效应/磁性传感器 Auto Quad 2-Wire Hall Effect Sw Int RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
发布紧急采购，3分钟左右您将得到回复。