- 您现在的位置：买卖IC网 > PDF目录9858 > MAX13345EETD+T (Maxim Integrated Products)IC TXRX USB FS 3WIRE 14-TDFN PDF资料下载
参数资料
| 型号： | MAX13345EETD+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/18页 |
| 文件大小： | 0K |
| 描述： | IC TXRX USB FS 3WIRE 14-TDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | USB 2.0 |
| 电源电压： | 2.3 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-WFDFN 裸露焊盘 |
| 供应商设备封装： | 14-TDFN-EP（3x3） |
| 包装： | 带卷 (TR) |
MAX13342E/MAX13345E
3-Wire Interface Full-Speed USB Transceivers
With/Without Internal Series Resistors
12
______________________________________________________________________________________
ESD Protection
The MAX13342E/MAX13345E feature ±15kV (HBM) ESD
protection on D+ and D-. The ESD structures withstand
high ESD in all states: normal operation, suspend, and
powered down. For the ±15kV ESD structures to work
correctly, a 1F or greater capacitor must be connected
from VTRM to GND. VBUS and D+/D- are characterized
for protection to the following limits:
±15kV using the Human Body Model
±8kV using the IEC 61000-4-2 Contact Discharge
Method
±8kV using the IEC 61000-4-2 Air-Gap Method
ESD Test Conditions
ESD performance depends on a variety of conditions.
Contact Maxim for a reliability report that documents
test setup, test methodology, and test results.
Human Body Model
Figure 11 shows the Human Body Model, and Figure
12 shows the current waveform it generates when dis-
charged into a low impedance. This model consists of
a 100pF capacitor charged to the ESD voltage of inter-
est, which is then discharged into the test device
through a 1.5k
resistor.
IEC 61000-4-2
The IEC 61000-4-2 standard covers ESD testing and
performance of finished equipment; it does not specifi-
cally refer to integrated circuits. The MAX13342E/
MAX13345E help the user design equipment that meets
level 4 of IEC 61000-4-2, without the need for additional
ESD-protection components. The major difference
between tests done using the Human Body Model and
IEC 61000-4-2 is a higher peak current in IEC 61000-4-
2 because series resistance is lower in the IEC 61000-
4-2 model. Hence, the ESD withstand voltage
measured to IEC 61000-4-2 is generally lower than that
measured using the Human Body Model. Figure 13
shows the IEC 61000-4-2 model. The Air-Gap
Discharge Method involves approaching the device
with a charged probe. The Contact Discharge Method
connects the probe to the device before the probe
is energized.
MAX13342E
SYSTEM
VOLTAGE
SUPPLY
VBUS
VL
SYSTEM
INTERFACE
DAT
SEO
GND
D-
D+
GND
D-
D+
VTRM
SUS
ENUM
OE
USB CONNECTOR
31.6
31.6
USB
POWER
0.1
F
1.0
F
1.0
F
BD
Figure 2. Adding External Resistors to the USB Connector for the MAX13342E
相关PDF资料 |
PDF描述 |
|---|---|
| MS3101A20-24S | CONN RCPT 4POS FREE HNG W/SCKT |
| MS27474P14A18P | CONN RCPT 18POS JAM NUT W/PINS |
| MS27484T14F15P | CONN PLUG 15POS STRAIGHT W/PINS |
| MS3100E22-27S | CONN RCPT 9POS WALL MNT W/SCKT |
| VE-J5K-MW-B1 | CONVERTER MOD DC/DC 40V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX13362ATL/V+ | 功能描述:监控电路 Automotive Contact Monitor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX13362ATL/V+T | 功能描述:监控电路 Automotive Contact Monitor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX13362EVKIT+ | 功能描述:界面开发工具 Evaluation Kit for the MAX13362 RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| MAX13366GTE/V+ | 功能描述:板机接口霍耳效应/磁性传感器 Auto Quad 2-Wire Hall Effect Sw Int RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| MAX13366GTE/V+T | 功能描述:板机接口霍耳效应/磁性传感器 Auto Quad 2-Wire Hall Effect Sw Int RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
发布紧急采购，3分钟左右您将得到回复。