参数资料
型号: MAX1363EUB+T
厂商: Maxim Integrated Products
文件页数: 1/25页
文件大小: 0K
描述: IC SYSTEM MON 12BIT 4CH 10-UMAX
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
位数: 12
采样率(每秒): 133k
数据接口: I²C,串行
转换器数目: 1
功率耗散(最大): 444.4mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 10-TFSOP,10-MSOP(0.118",3.00mm 宽)
供应商设备封装: 10-µMAX
包装: 带卷 (TR)
输入数目和类型: 4 个单端,单极;4 个单端,双极;2 个差分,单极;2 个差分,双极
General Description
The MAX1363/MAX1364 low-power, 12-bit, 4-channel
analog-to-digital converters (ADCs) feature a digitally
programmable window comparator with an interrupt out-
put for automatic system-monitoring applications. Once
configured, monitor mode automatically asserts an inter-
rupt when any analog input exceeds the programmed
upper or lower thresholds, without interaction to the
host. The MAX1363/MAX1364 respond to the SMBus
alert, allowing quick identification of the alarming device
on a shared interrupt. A programmable delay between
monitoring intervals lowers power consumption for
reduced monitoring rates.
In addition, the MAX1363/MAX1364 integrate an inter-
nal voltage reference, a clock, and a 1.7MHz, high-
speed, I2C-compatible, 2-wire serial interface. The opti-
mized interface allows a maximum conversion rate of
94.4ksps in normal mode while reading back the con-
version results. Each of the four analog inputs is config-
urable for single-ended or fully differential operation
and unipolar or bipolar operation. Two scan modes uti-
lize on-chip random access memory (RAM) to allow
eight conversions of a selected channel or scanning of
a group of channels to reduce interface overhead.
These devices operate from a single 2.7V to 3.6V
(MAX1363) or 4.5V to 5.5V (MAX1364) supply and
require only 436A at the maximum sampling rate of
133ksps in monitor mode and 670A at the maximum
sampling rate of 94.4ksps. AutoShutdown powers
down the devices between conversions, reducing sup-
ply current to less than 1A when idle.
The full-scale analog-input range is determined by the
internal reference or by an externally applied reference
voltage ranging from 1V to VDD. The MAX1363 features
a 2.048V internal reference, and the MAX1364 features
a 4.096V internal reference.
The MAX1363/MAX1364 are available in a 10-pin
MAX package and are specified over the extended
(-40°C to +85°C) temperature range. For 10-bit applica-
tions, refer to the pin-compatible MAX1361/MAX1362
data sheet.
Applications
System Monitoring/Supervision
Servers/Workstations
High-Reliability Power Supplies
Medical Instrumentation
Features
Monitor Mode
Programmable Lower/Upper Trip Threshold
Alarm-Status Register Records Fault Events
SMBus Alert Response
Programmable Sampling Intervals
12-Bit, I2C-Compatible ADC
±1 LSB INL, ±1 LSB DNL
4-Channel Single-Ended or 2-Channel Fully
Differential Inputs
Software-Programmable Bipolar/Unipolar
Conversions
Fast Sampling Rate
94.4ksps While Continuously Reading
Conversions
133ksps in Monitor Mode
High-Speed, I2C-Compatible Serial Interface
100kHz/400kHz Standard/Fast Mode
Up to 1.7MHz High-Speed Mode
Six Available I2C Slave Addresses
Single Supply
2.7V to 3.6V (MAX1363)
4.5V to 5.5V (MAX1364)
Internal Reference
2.048V (MAX1363)
4.096V (MAX1364)
External Reference: 1V to VDD
Low Power
436A in Monitor Mode (133ksps)
670A at 94.4ksps
6A at 1ksps
0.5A in Power-Down Mode
Small Package
10-Pin MAX
MAX1363/MAX1364
4-Channel, 12-Bit System Monitors with Programmable
Trip Window and SMBus Alert Response
________________________________________________________________
Maxim Integrated Products
1
Ordering Information/Selector Guide
19-3338; Rev 3; 3/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
EVALUATION
KIT
AVAILABLE
PART
TEMP RANGE
PIN-PACKAGE
I
2C SLAVE ADDRESS
SUPPLY VOLTAGE (V)
MAX1363EUB+
-40°C to +85°C
10 MAX
0110100/0110101
2.7 to 3.6
MAX1363MEUB+
-40°C to +85°C
10 MAX
0110110/0110111
2.7 to 3.6
SMBus is a trademark of Intel Corporation.
AutoShutdown is a trademark of Maxim Integrated Products, Inc.
MAX is a registered trademark of Maxim Integrated Products, Inc.
Typical Operating Circuit and Pin Configuration appear at
end of data sheet.
Ordering Information/Selector Guide continued at end of data sheet.
+Denotes a lead-free package.
相关PDF资料
PDF描述
IDT72281L20PF8 IC FIFO 32768X18 LP 20NS 64QFP
MS27467E21B16S CONN PLUG 16POS STRAIGHT W/SCKT
IDT72281L15PF8 IC FIFO 32768X18 LP 15NS 64QFP
MS27468P21B16P CONN RCPT 16POS JAM NUT W/PINS
V150B15M250BL3 CONVERTER MOD DC/DC 15V 250W
相关代理商/技术参数
参数描述
MAX1363EVKIT 功能描述:数据转换 IC 开发工具 Evaluation Kit for the MAX1361/MAX1363 RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V
MAX1363LEUB+T 制造商:Maxim Integrated Products 功能描述:ADC SGL SAR 133KSPS 12-BIT SERL 10PIN UMAX - Tape and Reel
MAX1363LEUB-T 制造商:Maxim Integrated Products 功能描述:4-CHANNEL, 12-BIT, SYSTEM MONITORS WITH PROGR - Tape and Reel
MAX1363MEUB 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
MAX1363MEUB+ 功能描述:模数转换器 - ADC 12-Bit 4Ch 133ksps 3.6V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32