参数资料
| 型号： | MAX1365ECM+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 10/25页 |
| 文件大小： | 0K |
| 描述： | IC PANEL METER 4.5 DIG 48LQFP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 250 |
| 显示器类型： | LED |
| 配置： | 7 段显示 |
| 数字或字符： | A/D，4.5 位数字 |
| 电源电压： | 2.7 V ~ 5.25 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
Stand-Alone, 4.5-/3.5-Digit Panel Meters
with 4–20mA Output
Pin Description (continued)
PIN
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
NAME
HOLD
DPSET2
DPSET1
LEDG
DIG0
DIG1
DIG2
DIG3
DIG4
SEGA
SEGB
LEDV
SEGC
SEGD
SEGE
SEGF
SEGG
SEGDP
LED_EN
NEGV
DPON
REF-
REF+
FUNCTION
Hold Logic Input. Connect HOLD to DV DD to hold the current ADC value on the LED. Connect
HOLD to GND to update the LED at a rate of 2.5Hz and disable the hold function. Placing the
device into hold mode initiates an offset mismatch calibration. Assert HOLD high for a minimum of
2s to ensure the completion of offset mismatch calibration (see Table 1).
Display Decimal-Point Logic-Input 2. Controls the decimal point of the LED. See the Decimal-Point
Control section.
Display Decimal-Point Logic-Input 1. Controls the decimal point of the LED. See the Decimal-Point
Control section.
LED Segment-Drivers Ground
Digit 0 Driver Out (Connected to GLED for the MAX1367)
Digit 1 Driver Out
Digit 2 Driver Out
Digit 3 Driver Out
Digit 4 Driver Out
Segment A Driver
Segment B Driver
LED-Display Segment-Driver Supply. Connect to a +2.7V to +5.25V supply. Bypass with a 0.1μF
capacitor to LEDG.
Segment C Driver
Segment D Driver
Segment E Driver
Segment F Driver
Segment G Driver
Segment DP Driver
Active-High LED Enable. The MAX1365/MAX1367 display driver turns off when LED_EN is low.
The MAX1365/MAX1367 LED-display driver turns on when LED_EN is high.
-2.5V Charge-Pump Voltage Output. Connect a 0.1μF capacitor to GND.
Decimal-Point Enable Input. Controls the decimal point of the LED. See the Decimal-Point Control
section. Connect DPON to DV DD to enable the decimal point.
ADC Negative Reference Voltage Input. For internal reference operation, connect REF- to GND.
For external reference operation, bypass REF- to GND with a 0.1μF capacitor and
set V REF- from -2.2V to +2.2V (V REF+ > V REF- ).
ADC Positive Reference Voltage Input. For internal reference operation, connect a 4.7μF capacitor
from REF+ to GND. For external reference operation, bypass REF+ to GND with a 0.1μF capacitor
and set V REF+ from -2.2V to +2.2V (V REF+ > V REF- ).
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1366ECM+ | IC PANEL METER 4.5 DIG 48LQFP |
| MAX136CPL+ | IC ADC 3 1/2DIG W/LCD DVR 40-DIP |
| MAX14514ETD+T | IC CONV DC-AC EL LAMP 14TDFN |
| MAX14525ETA+T | IC BATTERY SWITCH 4INPUTS 8TDFN |
| MAX14530EWC+T | IC OVERVOLT PROT 6.8V 12-WLP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1365ECM+ | 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
| MAX1365ECM+T | 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
| MAX1365ECM-T | 功能描述:LED显示驱动器 RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
| MAX1366ECM | 功能描述:LED显示驱动器 RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
| MAX1366ECM+ | 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。