参数资料
| 型号： | MAX14820ETG+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 13/30页 |
| 文件大小： | 0K |
| 描述： | IC IO-LINK TXRX 24TQFN |
| 标准包装： | 2,500 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
MAX14820
IO-Link Device Transceiver
20
Maxim Integrated
Table 2. DiLvl and LI Output
Table 3. QLvl and RX Output
VDI (V)
DiLvl BIT
LI OUTPUT
< 5.2
0
High
> 8
1
Low
VC/Q (V)
QLvl BIT
RX OUTPUT
< 8
1
High
>13
0
Low
BIT
NAME
DESCRIPTION
D4
QLvl
C/Q Logic Level. The QLvl bit is the inverse of the logic level at C/Q. QLvl is 1 when the
C/Q input level is low (< 8V) and is 0 when the C/Q logic level is high (> 13V) (Table 3).
QLvl remains active when the C/Q receiver is disabled (RxDis = 1). QLvl does not affect
IRQ. QLvl is not changed when the Status register is read.
D3
C/QFaultInt
C/Q Fault Interrupt. The C/QFaultInt interrupt bit and C/QFault bit (in the Mode register)
are set when a short circuit or voltage fault occurs on the C/Q driver output (see the C/Q
Fault Detection section for more information). IRQ asserts when C/QFault is 1. Read the
Status register to clear the C/QFaultInt bit and deassert IRQ.
D2
UV33Int
Internal 3.3V LDO (LDO33) Undervoltage Warning. Both the UV33Int interrupt bit and
the UV33En bit (in the Mode register) are set when VLDO33 falls below the 2.4V LDO33
undervoltage threshold. If UV33En is set in the Mode register, IRQ asserts low when the
UV33Int bit is 1. Read the Status register to clear the UV33Int bit and deassert IRQ.
Set the UV33En bit to 1 in the Mode register to enable undervoltage monitoring for
UV33Int. When enabled, UV asserts high when the UV33Int bit is 1. UV deasserts when
VLDO33 rises above the LDO33 undervoltage threshold.
D1
UV24Int
VCC Undervoltage Interrupt. The UV24Int interrupt bit and the UV24 bit (in the Mode
register) are set when the VCC voltage falls below the 7.4V undervoltage threshold. IRQ
asserts low when the UV24Int bit is 1. Read the Status register to clear the UV24Int bit
and deassert IRQ. VCC undervoltage detection cannot be disabled.
D0
OTempInt
Overtemperature Warning. The OTempInt interrupt bit and the OTemp bit (in the Mode
register) are set when a high-temperature condition is detected by the devices. OTemp
is set when the temperature of the die exceeds +115NC (typ). OTempInt is set and IRQ
asserts when the OTemp bit is 1. The OTempInt bit is cleared and IRQ deasserts when
the Status register is read.
Once cleared, OTempInt is not reset if the die temperature remains above the thermal
warning threshold and does not fall below +95
°C.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-2TJ-MX-F1 | CONVERTER MOD DC/DC 36V 75W |
| MAX234EWE+T | IC RS-232 DRVR/RCVR 16-SOIC |
| VI-2TH-MX-F4 | CONVERTER MOD DC/DC 52V 75W |
| AD9235BRU-65 | IC ADC 12BIT 65MSPS 28-TSSOP |
| MS27656E13A35PB | CONN RCPT 22POS WALL MNT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX14820EVKIT# | 功能描述:界面开发工具 MAX14820/21 EVAL KIT RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| MAX14821ETG+ | 功能描述:输入/输出控制器接口集成电路 NEW RoHS:否 制造商:Silicon Labs 产品: 输入/输出端数量: 工作电源电压: 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-64 封装:Tray |
| MAX14821ETG+T | 功能描述:输入/输出控制器接口集成电路 NEW RoHS:否 制造商:Silicon Labs 产品: 输入/输出端数量: 工作电源电压: 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-64 封装:Tray |
| MAX14821EVKIT# | 功能描述:界面开发工具 MAX14820/21 EVAL KIT RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| MAX14821EWA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。