- 您现在的位置：买卖IC网 > PDF目录11133 > MAX14978ETO+ (Maxim Integrated Products)IC ANLG PASSIVE SW USB 42-TQFN PDF资料下载
参数资料
| 型号： | MAX14978ETO+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/15页 |
| 文件大小： | 0K |
| 描述： | IC ANLG PASSIVE SW USB 42-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 240 |
| 功能： | USB 开关 |
| 导通状态电阻： | 10 欧姆 |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 5.5 V |
| 电流 - 电源： | 600nA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 42-WFQFN 裸露焊盘 |
| 供应商设备封装： | 42-TQFN-EP（3.5x9） |
| 包装： | 托盘 |
MAX14978
SuperSpeed USB Passive Switch
(Low/Full/Hi/SuperSpeed)
12
Detailed Description
The MAX14978 is ideal for SuperSpeed USB and low/
full/Hi-Speed (1.5/12/480Mbps) USB switching applica-
tions. The low VIH threshold of the device permits it to
be used with logic levels as low as 1.4V. The device’s
Hi-Speed USB analog switches are based on a charge-
pump-assisted n-channel architecture and operate with
36FA (typ) quiescent current. The device features dual
digital control inputs (SEL_) to switch Hi-Speed USB and
SuperSpeed USB signal paths separately.
Digital Control Inputs (SEL1, SEL2)
The device’s provides dual digital control inputs (SEL1,
SEL2) to select the signal path between the COM_ and
NO_ or NC_ channels. Drive SEL1 and SEL2 rail-to-rail
to minimize power consumption. See the Functional
Diagram/Truth Table.
Analog-Signal Levels
The device’s switches are bidirectional, allowing NO_,
NC_, and COM_ to be configured as either inputs or
outputs.
The Hi-Speed USB switches are equipped with a charge-
pump-assisted n-channel architecture that allows the
switch to pass analog signals that exceed VCC up to the
overvoltage fault-protection threshold. This allows USB
signals that exceed VCC to pass, allowing compliance
with USB requirements for voltage levels.
The SuperSpeed USB switches accept signals on the
COM_, NO_, and NC_ channels within a range of -0.1V
to (VDD - 1.2V). Signals on the COM_+ channels are
routed to either the NO_+ or NC_+ channels, and signals
on the COM_- channels are routed to either the NO_- or
NC_- channels.
Overvoltage Fault Protection
The device features overvoltage fault protection on
COMD_. Fault protection prevents these switches from
being damaged due to shorts to the USB VBUS voltage
rail. Fault protection protects the switch and USB trans-
ceiver from damaging voltage levels. When voltages
on COMD_ exceed the fault-protection threshold (VFP),
COMD_, NCD_ and NOD_ are high impedance.
Enable Input
The device features a shutdown mode for the Hi-Speed
USB analog switches that reduces the VCC quiescent
current to 0.1FA (typ) and places COMD+ and COMD-
in high impedance. Drive EN high to place the Hi-Speed
USB analog switches in shutdown mode, and drive EN
low for normal operation.
Applications Information
USB Switching
The device’s analog switches are fully compliant with the
USB 2.0 and USB 3.0 specifications. The low on-resis-
tance and low on-capacitance of these switches make
them ideal for high-performance switching applications.
The device is ideal for routing USB data lines and for
applications that require switching between multiple
USB hosts or devices. The device’s Hi-Speed USB ana-
log switches also feature overvoltage fault protection to
guard systems against shorts to the USB VBUS voltage
rail that is required for all Hi-Speed USB applications.
Extended ESD Protection
As with all Maxim devices, ESD protection structures are
incorporated on all pins to protect against electrostatic
discharges encountered during handling and assembly.
COMD+ and COMD- are further protected against static
electricity. Maxim’s engineers have developed state-of-
the-art structures to protect these pins against ESD up
to Q15kV without damage. The ESD structures withstand
high ESD in normal operation and when the device is
powered down. After an ESD event, the device continues
to function without latchup.
The device is characterized for protection to the follow-
ing limits:
Q15kV using Human Body Model
Q15kV using IEC 61000-4-2 Air Gap Discharge method
Q8kV using IEC 61000-4-2 Contact Discharge method
Note: High ESD performance is only applicable to the
Hi-Speed USB section of the switch. The SuperSpeed
USB section is rated to Q6kV HBM.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B60-IX-F2 | CONVERTER MOD DC/DC 5V 75W |
| MAX4888BETI+T | IC SWITCH QUAD SPDT 28TQFN |
| VI-B60-IW-F4 | CONVERTER MOD DC/DC 5V 100W |
| VI-B60-IW-F3 | CONVERTER MOD DC/DC 5V 100W |
| MAX4592ESE+T | IC SWITCH QUAD SPST 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX14978ETO+ | 功能描述:电源开关 IC - USB USB 3.0 Switch RoHS:否 制造商:Micrel 电源电压-最小:2.7 V 电源电压-最大:5.5 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-8 封装:Tube |
| MAX14978ETO+T | 功能描述:电源开关 IC - USB USB 3.0 Switch RoHS:否 制造商:Micrel 电源电压-最小:2.7 V 电源电压-最大:5.5 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-8 封装:Tube |
| MAX14979EETX+ | 功能描述:模拟开关 IC 7 Ch LVDS Switch RoHS:否 制造商:Texas Instruments 开关数量:2 开关配置:SPDT 开启电阻（最大值）:0.1 Ohms 切换电压（最大）: 开启时间（最大值）: 关闭时间（最大值）: 工作电源电压:2.7 V to 4.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:DSBGA-16 |
| MAX14979EETX+GH7 | 功能描述:模拟开关 IC High BW LVDS Switch RoHS:否 制造商:Texas Instruments 开关数量:2 开关配置:SPDT 开启电阻（最大值）:0.1 Ohms 切换电压（最大）: 开启时间（最大值）: 关闭时间（最大值）: 工作电源电压:2.7 V to 4.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:DSBGA-16 |
| MAX14979EETX+T | 功能描述:模拟开关 IC 7 Ch LVDS Switch RoHS:否 制造商:Texas Instruments 开关数量:2 开关配置:SPDT 开启电阻（最大值）:0.1 Ohms 切换电压（最大）: 开启时间（最大值）: 关闭时间（最大值）: 工作电源电压:2.7 V to 4.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:DSBGA-16 |
发布紧急采购，3分钟左右您将得到回复。