- 您现在的位置：买卖IC网 > PDF目录17273 > MAX15032EVKIT+ (Maxim Integrated Products)KIT EVAL FOR MAX15032 PDF资料下载
参数资料
| 型号： | MAX15032EVKIT+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/10页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MAX15032 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | DC/DC，步升 |
| 输出及类型： | 1，非隔离 |
| 输出电压： | 30V |
| 电流 - 输出： | 20mA |
| 输入电压： | 2.9 ~ 5.5 V |
| 稳压器拓扑结构： | 升压 |
| 频率 - 开关： | 500kHz |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | MAX15032 |
500kHz, 36V Output, 600mW PWM
Step-Up DC-DC Converter
R 1 = R 2 ? ? OUT ? ? 1 ?
Detailed Description
The MAX15032 constant-frequency, current-mode,
pulse-width-modulating (PWM) boost converter is
intended for low-voltage systems that often need a
locally generated high voltage. This device is capable
of generating low-noise, high-output voltage required
for PIN and varactor diode biasing and LCD displays.
The MAX15032 operates either from +2.7V to +5.5V or
from +5.5V to +11V. For +2.7V to +5.5V operation, an
internal charge pump with an external 10nF ceramic
capacitor is used. The MAX15032 also features a shut-
down logic input to disable the device and reduce its
standby current to 0.5μA (max).
The MAX15032 operates in discontinuous mode in order
to reduce the switching noise caused by the reverse
recovery charge of the rectifier diode. Other continuous
mode boost converters generate large voltage spikes at
the output when the LX switch turns on because there is
a conduction path between the output, diode, and
switch to ground during the time needed for the diode to
turn off and reverse its bias voltage. To reduce the out-
put noise even further, the LX switch turns off by taking
6.8ns typically to transition from “ON” to “OFF.” As a
consequence, the positive slew rate of the LX node is
reduced and the current from the inductor does not
“force” the output voltage as hard as would be the case
if the LX switch were to turn off more quickly.
Also, the constant-frequency (500kHz) PWM architec-
ture generates an output voltage ripple that is easy to
filter. A 40V lateral DMOS device used as the internal
power switch makes the device ideal for boost convert-
ers with output voltages up to 36V.
The MAX15032 can also be used in other topologies
where the PWM switch is grounded, like SEPIC and
flyback.
PWM Controller
The heart of the MAX15032 current-mode PWM con-
troller is a BiCMOS multi-input comparator that simulta-
neously processes the output-error signal and switch
current signal. The main PWM comparator is direct
summing, lacking a traditional error amplifier and its
associated phase shift. The direct summing configura-
tion approaches ideal cycle-by-cycle control over the
output voltage since there is no conventional error
amplifier in the feedback path.
The device operates in PWM mode using a fixed-fre-
quency, current-mode operation. The current-mode fre-
quency loop regulates the peak inductor current as a
function of the output error signal. The current-mode
PWM controller is intended for discontinuous conduc-
tion mode (DCM) operation. No internal slope compen-
sation is added to the current signal.
Shutdown ( SHDN )
The MAX15032 features an active-low shutdown input
( SHDN ). Pull SHDN low to enter shutdown. During shut-
down, the supply current drops to 0.5μA (max).
However, the output remains connected to the input
through the inductor and output rectifier, holding the
output voltage to one diode drop below V IN when the
MAX15032 shuts down. Connect SHDN to IN for
always-on operation.
Charge Pump
At low supply voltages (+2.7V to +5.5V), an internal
charge-pump circuit and an external 10nF ceramic
capacitor double the available supply voltage in order
to drive the internal switch efficiently.
In the +5.5V to +11V supply voltage range, the charge
pump must be disabled by connecting CP to IN and
leaving CN unconnected.
Design Procedure
Setting the Output Voltage
Set the MAX15032 output voltage by connecting a
resistive divider from the output to FB to GND (see the
Typical Operating Circuit). Select R2 (FB to GND resis-
tor) between 6k Ω and 10k Ω . Calculate R1 (V OUT to FB
resistor) with the following equation:
? ?
? ? V ? ?
? ? V FB ? ?
where V FB = 1.245V (see the Electrical Characteristics
table) and V OUT can range from (V IN + 1V) to 36V.
_______________________________________________________________________________________
7
相关PDF资料 |
PDF描述 |
|---|---|
| RBC10DREH | CONN EDGECARD 20POS .100 EYELET |
| RCC08DRXI | CONN EDGECARD 16POS DIP .100 SLD |
| HCC07DREF-S13 | CONN EDGECARD 14POS .100 EXTEND |
| 100R26-127B | CABLE FLAT FLEX 26POS 1MM 5" |
| RCC06DRAN | CONN EDGECARD 12POS R/A .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX15032EVKIT+ | 功能描述:电源管理IC开发工具 MAX15032 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX15033AAUI+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX15033ATE+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX15033BAUI+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX15034AAUI+ | 功能描述:DC/DC 开关控制器 Configurable Synchronous Buck RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
发布紧急采购，3分钟左右您将得到回复。