- 您现在的位置：买卖IC网 > PDF目录383327 > MAX1587 (Maxim Integrated Products, Inc.) High-Efficiency, Low-IQ PMICs with Dynamic Core for PDAs and Smart Phones PDF资料下载
参数资料
| 型号： | MAX1587 |
| 厂商： | Maxim Integrated Products, Inc. |
| 英文描述： | High-Efficiency, Low-IQ PMICs with Dynamic Core for PDAs and Smart Phones |
| 中文描述： | 高效率，低智商与动态的PDA和智能手机PMIC的核心 |
| 文件页数： | 16/32页 |
| 文件大小： | 656K |
| 代理商： | MAX1587 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
M
High-Efficiency, Low-I
Q
PMICs with
Dynamic Core for PDAs and Smart Phones
16
______________________________________________________________________________________
Pin Description (continued)
PIN
MAX
1586
MAX
1587
NAME
FUNCTION
35
29
SRAD
Serial Address Bit. SRAD allows the serial address of the MAX1586/MAX1587 to be changed in case it
conflicts with another serial device. If SRAD = GND, A1 = 0. If SRAD = IN, A1 = 1.
36
30
RSO
Open-Drain Reset Output. Deasserts when V7 exceeds 2.55V (typ rising). Has 65ms delay before release.
RSO
is expected to connect to nRESET on the CPU.
37
31
MR
Manual Reset Input. A low input causes the
RSO
output to go low but impacts no other MAX1586/MAX1587
functions.
38
32
CC3
REG 3 Compensation Node. Connect a series resistor and capacitor from CC3 to GND to compensate the
regulation loop. See the
Compensation and Stability
section
.
39
33
FB3
REG3 Feedback-Sense Input. Connect directly to the REG3 output voltage. Output voltage is set by the
serial interface.
40
—
ON6
On/Off Input for REG6. Drive high to turn on. When enabled, the REG6 output activates. ON6 has hysteresis
so an RC can be used to implement manual sequencing with respect to other inputs. It is expected that
ON1, ON2, and ON6 are connected to SYS_EN.
41
—
V6
Also known as VCC_USIM. Linear-regulator output. This voltage is programmable through the I
2
C
interface to 0V, 1.8V, 2.5V, or 3.0V. The default voltage is 0V. REG6 is activated when ON6 is high.
42
—
IN6
Power Input to the V6 LDO. Typically connected to V1, but can also connect to IN.
43
36
PG1
REG1 Power Ground. Connect directly to a power-ground plane. Connect PG1, PG2, PG3, and GND
together at a single point as close to the IC as possible.
44
37
LX1
REG1 Switching Node. Connects to the REG1 inductor.
45
38
PV1
REG1 Power Input. Bypass to PG2 with a 4.7μF or greater low-ESR ceramic capacitor. PV1, PV2, PV3, and
IN must connect together externally.
46
35
ON1
On/Off Input for REG1. Drive high to turn on REG1. When enabled, the REG1 output soft-starts. ON1 has
hysteresis so an RC can be used to implement manual sequencing with respect to other inputs. It is
expected that ON1, ON2, and ON6 connect to SYS_EN.
47
39
SLP
Sleep Input.
SLP
selects which regulators ON1 and ON2 turn on.
SLP
= high is normal operation (ON1 and
ON2 are the enables for the V1 and V2 DC-DC converters).
SLP
= low is sleep operation (ON1 and ON2 are
the enables for the V1 and V2 LDOs).
48
—
DBI
Dual-Mode, Dead-Battery Input. Connect DBI to IN to set the dead-battery falling threshold to 3.15V (no
resistors needed). Connect DBI to a resistor-divider for an adjustable DBI threshold.
On/Off Input for REG4 and REG5. Drive high to turn on. When enabled, the REG4 and REG5 outputs
activate. ON45 has hysteresis so an RC can be used to implement manual sequencing with respect to
other inputs. It is expected that ON45 is connected to PWR_EN.
—
22
ON45
EP
EP
EP
Exposed Metal Pad. Connect the exposed pad to ground. Connecting the exposed pad to ground does not
remove the requirement for proper ground connections to the appropriate ground pins.
I
2
C is a trademark of Philips Corp. Purchase of I
2
C components
from Maxim Integrated Products, Inc. or one of its sublicensed
Associated Companies, conveys a license under the Philips
I
2
C Patent Rights to use these components in an I
2
C system,
provided that the system conforms to the I
2
C Standard
Specification as defined by Philips.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1587AETL | High-Efficiency, Low-IQ PMICs with Dynamic Core for PDAs and Smart Phones |
| MAX1586BETM | High-Efficiency, Low-IQ PMICs with Dynamic Core for PDAs and Smart Phones |
| MAX1589A | Low-Input-Voltage, 500mA LDO Regulator with RESET in SOT and TDFN |
| MAX1589AETT | Low-Input-Voltage, 500mA LDO Regulator with RESET in SOT and TDFN |
| MAX1589AEZT | Low-Input-Voltage, 500mA LDO Regulator with RESET in SOT and TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1587AETL | 功能描述:直流/直流开关调节器 PMICs w/Dynamic Core for PDAs RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1587AETL+ | 功能描述:直流/直流开关调节器 PMICs w/Dynamic Core for PDAs RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1587AETL+T | 功能描述:直流/直流开关调节器 PMICs w/Dynamic Core for PDAs RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1587AETL-T | 功能描述:直流/直流开关调节器 PMICs w/Dynamic Core for PDAs RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1587AEVKIT | 功能描述:直流/直流开关转换器 MAX1587A Evaluation Kit/Evaluation System RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。