参数资料
型号: MAX16000BTC+T
厂商: Maxim Integrated Products
文件页数: 20/26页
文件大小: 0K
描述: IC UP SUPERVISOR QUAD 12-TQFN
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
类型: 多压监控器
监视电压数目: 4
输出: 开路漏极或开路集电极
复位: 低有效
复位超时: 最小为 140 ms
电压 - 阀值: 1.8V,3.3V,可调,可调
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 12-WQFN 裸露焊盘
供应商设备封装: 12-TQFN-EP(4x4)
包装: 带卷 (TR)
MAX16000–MAX16007
Low-Voltage, Quad-/Hex-/Octal-Voltage
μP Supervisors
V CC = 3.3V
V CC
OUT_
MAX16001/
MAX16002/
MAX16004–MAX16007
100k ?
RESET
5V
V CC
IN_
V TH_
RESET
OUT_
t RD
10%
10%
V TH_
t RP
90%
90%
GND
GND
t D
t D
Figure 11. Interfacing to a Different Logic Supply Voltage
RESET Output (MAX16001/MAX16002/
MAX16004–MAX16007)
RESET asserts low when any of the monitored voltages
fall below their respective thresholds or MR is asserted.
RESET remains asserted for the reset timeout period
after all monitored voltages exceed their respective
thresholds and MR is deasserted (see Figure 12). This
open-drain output has a 30μA internal pullup. An exter-
nal pullup resistor to any voltage from 0 to 5.5V overrides
the internal pullup if interfacing to different logic supply
voltages. Internal circuitry prevents reverse current flow
from the external pullup voltage to V CC (Figure 11).
20
Figure 12. Output Timing Diagram
WDO (MAX16005 Only)
WDO asserts and stays low whenever any of the IN_
inputs fall below their respective thresholds. WDO
deasserts without a timeout delay when all the IN_
inputs rise above their thresholds. When all the IN_
inputs rise above their thresholds, WDO asserts low
whenever the watchdog timer times out. WDO
deasserts after a valid WDI transition or if MR is pulled
low. The watchdog timer begins counting after the reset
timeout period once MR goes high. Pull MARGIN low to
deassert WDO regardless of any other condition. The
watchdog timer continues to run when MARGIN is low
and if a timeout occurs. WDO will assert MR after
MARGIN is deasserted. This open-drain output has a
30μA internal pullup. An external pullup resistor to any
voltage from 0 to 5.5V overrides the internal pullup if
interfacing to different logic supply voltages. Internal cir-
cuitry prevents reverse current flow from the external
pullup voltage to V CC (Figure 11).
Maxim Integrated
相关PDF资料
PDF描述
GCC31DRAH-S734 CONN EDGECARD 62POS .100 R/A SLD
ECC44DCMT CONN EDGECARD 88POS .100 WW
AMC07DRXN-S734 CONN EDGECARD 14POS DIP .100 SLD
MAX16000ATC+T IC UP SUPERVISOR QUAD 12-TQFN
AMC05DRYN CONN EDGECARD 10POS .100 DIP SLD
相关代理商/技术参数
参数描述
MAX16000CTC 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE, QUAD-/HEX-/OCTAL-VOLTAGE MICROPR - Rail/Tube
MAX16000CTC+ 功能描述:监控电路 Quad/Hex/Octal Volt uP Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
MAX16000CTC+T 功能描述:监控电路 Quad/Hex/Octal Volt uP Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
MAX16000DTC 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE, QUAD-/HEX-/OCTAL-VOLTAGE MICROPR - Rail/Tube
MAX16000DTC+ 功能描述:监控电路 Quad/Hex/Octal Volt uP Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel