- 您现在的位置：买卖IC网 > PDF目录13559 > MAX1680ESA+T (Maxim Integrated Products)IC REG MULTI CONFIG 125MA 8SOIC PDF资料下载
参数资料
| 型号： | MAX1680ESA+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | IC REG MULTI CONFIG 125MA 8SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 切换式电容器（充电泵），倍增器，反相 |
| 输出数： | 1 |
| 输入电压： | 2 V ~ 5.5 V |
| 频率 - 开关： | 125kHz，250kHz |
| 电流 - 输出： | 125mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 8-SOIC |
125mA, Frequency-Selectable,
Switched-Capacitor Voltage Converters
______________________________________________________________Pin Description
FUNCTION
PIN
NAME
INVERTER
DOUBLER
1
2
FSEL
CAP+
Selects operating frequency. MAX1680: 250kHz when FSEL is low, 125kHz when FSEL is high. MAX1681:
1MHz when FSEL is low, 500kHz when FSEL is high.
Positive Charge-Pump Capacitor Connection
3
4
5
6
GND
CAP-
OUT
LV
Power-Supply Ground Input
Negative Charge-Pump Capacitor Connection
Negative Voltage Output
Logic Voltage Input. Connect LV to GND.
Power-Supply Positive Voltage Input
Power-Supply Ground Connection
Connect LV to OUT.
Shutdown Input. Driving SHDN high disables the
7
SHDN
charge pump, and the output goes to 0V. SHDN is a
Not available; connect to OUT.
CMOS input.
8
IN
Power-Supply Positive Voltage Input
Positive Voltage Output
_______________Detailed Description
The MAX1680/MAX1681 switched-capacitor voltage
converters either invert or double the input voltage.
They have low output resistance (3.5 ? ) and can deliver
up to 125mA output current. These devices operate at
one of two selectable frequencies: 125kHz/250kHz
(MAX1680) and 500kHz/1MHz (MAX1681). This pro-
vides the flexibility to optimize capacitor size, operating
supply current, and overall circuit efficiency. Frequency
selection also allows for minimizing coupling into other
sensitive circuits. These devices contain no internal
divider; the oscillator frequency equals the switching
frequency. The devices can easily be cascaded to pro-
duce a higher output voltage, or paralleled to deliver
more current.
The MAX1680/MAX1681 feature a shutdown mode that
reduces supply current to <1μA (SHDN = high). OUT,
in the inverter configuration, pulls to ground in shut-
down mode. Shutdown is not available in the doubler
configuration; connect SHDN to OUT.
__________Applications Information
Voltage Inverter
A simple voltage inverter is the most common
output resistance produces a typical drop of only 0.44V
with a 125mA load. This low output resistance makes
the devices fairly insensitive to changes in load (see
the graphs for Output Source Resistance vs.
Temperature and Supply Voltage in the Typical
Operating Characteristics section).
Voltage Doubler
The MAX1680/MAX1681 can be configured as a volt-
age doubler with two external capacitors as shown in
the Typical Operating Circuits (doubler configuration).
When loaded, the output voltage drop is similar to that
of the voltage inverter. The minimum input supply range
is slightly higher than in the inverter configuration.
Calculate ripple voltage using the equation in the
Capacitor Selection section.
Frequency Control
A frequency-control pin, FSEL, provides design flexibili-
ty. Each device has two selectable frequencies:
125kHz/250kHz (MAX1680) and 500kHz/1MHz
(MAX1681). This allows optimization of capacitor size
and supply current for a given output load. Table 1
summarizes the frequency options .
Table 1. Nominal Switching Frequencies
MAX1680/MAX1681 application. It requires three exter-
nal capacitors (including the input bypass capacitor)
as shown in the Typical Operating Circuits (inverter
FSEL CONNECTION
FREQUENCY (kHz)
MAX1680 MAX1681
configuration). Although the output is not regulated, low
FSEL = LV
FSEL = IN
250
125
1000
500
6
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| SC312MF-1R5 | INDUCTOR SMD 1.5UH 2.50A 100KHZ |
| MAX1681ESA+T | IC REG MULTI CONFIG ADJ 8SOIC |
| VI-25N-EX-F1 | CONVERTER MOD DC/DC 18.5V 75W |
| MAX735CPA+ | IC REG INV -5V 0.2A 8DIP |
| AVS226M25C12T-F | CAP ALUM 22UF 25V 20% SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX16810ATU+ | 功能描述:LED照明驱动器 RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16810ATU+T | 功能描述:LED照明驱动器 RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16811SEUS+ | 制造商:Maxim Integrated Products 功能描述: |
| MAX16812ATI/V+ | 功能描述:LED照明驱动器 w/Analog & PWM Dimming Control RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16812ATI/V+T | 功能描述:LED照明驱动器 w/Analog & PWM Dimming Control RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。