- 您现在的位置：买卖IC网 > PDF目录20781 > MAX16821CATI+ (Maxim Integrated)IC LED DRIVR HIGH BRIGHT 28-TQFN PDF资料下载
参数资料
| 型号： | MAX16821CATI+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 8/24页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVR HIGH BRIGHT 28-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 拓扑： | 高端，低端，PWM，SEPIC，降压（降压），升压（升压） |
| 输出数： | 1 |
| 内部驱动器： | 无 |
| 类型 - 主要： | 车载，背光 |
| 类型 - 次要： | 高亮度 LED（HBLED） |
| 频率： | 125kHz ~ 1.5MHz |
| 电源电压： | 4.75 V ~ 5.5 V，7 V ~ 28 V |
| 输出电压： | 5.1V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 供应商设备封装： | 28-TQFN-EP（5x5） |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 125°C |
High-Power Synchronous HBLED
Drivers with Rapid Current Pulsing
Detailed Description
The MAX16821A/MAX16821B/MAX16821C are high-per-
formance average current-mode PWM controllers for
high-power and high-brightness LEDs (HBLEDs). The
average current-mode control technique offers inherently
stable operation, reduces component derating and size
by accurately controlling the inductor current. The
devices achieve high efficiency at high currents (up to
30A) with a minimum number of external components. A
logic input (MODE) allows the LED driver to switch
between buck and boost modes of operation.
The MAX16821A/MAX16821B/MAX16821C feature a
CLKOUT output 180° out-of-phase with respect to either
the high-side or low-side driver, depending on MODE’s
logic level. CLKOUT provides the drive for a second
out-of-phase LED driver for applications requiring
reduced input capacitor ripple current while operating
another LED driver.
The MAX16821A/MAX16821B/MAX16821C consist of
an inner average current regulation loop controlled by
an outer loop. The combined action of the inner current
loop and outer voltage loop corrects the LED current
errors by adjusting the inductor current resulting in a
tightly regulated LED current. The differential amplifier
(SENSE+ and SENSE- inputs) senses the LED current
using a resistor in series with the LEDs and produces
an amplified version of the sense voltage at DIFF. The
resulting amplified sensed voltage is compared against
an internal 0.6V reference at the error amplifier input.
Input Voltage
The MAX16821A/MAX16821B/MAX16821C operate
Undervoltage Lockout (UVLO)
The MAX16821A/MAX16821B/MAX16821C include
UVLO and a 2048 clock-cycle power-on-reset circuit.
The UVLO rising threshold is set to 4.3V with 200mV
hysteresis. Hysteresis at UVLO eliminates chattering
during startup. Most of the internal circuitry, including
the oscillator, turns on when the input voltage reaches
4V. The MAX16821A/MAX16821B/MAX16821C draw up
to 3.5mA of quiescent current before the input voltage
reaches the UVLO threshold.
Soft-Start
The MAX16821A/MAX16821B/MAX16821C include an
internal soft-start for a glitch-free rise of the output volt-
age. After 2048 power-on-reset clock cycles, a 0.6V
reference voltage connected to the positive input of the
internal error amplifier ramps up to its final value after
1024 clock cycles. Soft-start reduces inrush current
and stress on system components. During soft-start,
the LED current will ramp monotonically towards its
final value.
Internal Oscillator
The internal oscillator generates a clock with the fre-
quency inversely proportional to the value of R T (see
the Typical Operating Circuit). The oscillator frequency
is adjustable from 125kHz to 1.5MHz range using a sin-
gle resistor connected from RT/SYNC to SGND. The
frequency accuracy avoids the overdesign, size, and
cost of passive filter components like inductors and
capacitors. Use the following equation to calculate the
oscillator frequency:
For 120k ? ≤ R T ≤ 500k ? :
with a 4.75V to 5.5V input supply range when the inter-
nal LDO is disabled (V CC connected to IN) or a 7V to
28V input supply range when the internal LDO is
enabled. For a 7V to 28V input voltage range, the inter-
f SW =
6 . 25 x 10 10
R T
( Hz )
f SW =
nal LDO provides a regulated 5V output with 60mA of
sourcing capability. Bypass V CC to SGND with 4.7μF
and 0.1μF low-ESR ceramic capacitors.
The MAX16821A/MAX16821B/MAX16821C’s V DD input
provides supply voltage for the low-side and the high-
For 40k ? ≤ R T ≤ 120k ? :
6 . 40 x 10 10
R T
( Hz )
side MOSFET drivers. Connect V DD to V CC using an
R-C filter to isolate the analog circuits from the MOSFET
drivers. The internal LDO powers up the MAX16821A/
MAX16821B/MAX16821C. For applications utilizing a
5V input voltage, disable the internal LDO by connect-
ing IN and V CC together. The 5V power source must be
in the 4.75V to 5.5V range of for proper operation of the
MAX16821A/MAX16821B/MAX16821C.
The oscillator also generates a 2V P-P ramp signal for
the PWM comparator and a 180° out-of-phase clock
signal at CLKOUT to drive a second out-of-phase LED
current regulator.
8
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX16821BATI+ | IC LED DRIVR HIGH BRIGHT 28-TQFN |
| LQP03TN3N9C00D | INDUCTOR 3.9NH 170MA 0201 |
| MAX7302AEE+ | IC LED DRIVER LINEAR 16-QSOP |
| GBC10DCAD | CONN EDGECARD 20POS R/A .100 SLD |
| EBC28DCSN-S288 | CONN EDGECARD 56POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX16821CATI+ | 功能描述:LED照明驱动器 Synchronous HB w/Rapid Current Puls RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16821CATI+T | 功能描述:LED照明驱动器 Synchronous HB w/Rapid Current Puls RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16821EVKIT+ | 制造商:Maxim Integrated Products 功能描述:HIGH-POWER SYNCHRONOUS HBLED DRIVER - Boxed Product (Development Kits) |
| MAX16822AASA/V+ | 功能描述:LED照明驱动器 2MHz HB w/MOSFET & HSide Crnt Sense RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX16822AASA/V+T | 功能描述:LED照明驱动器 2MHz HB w/MOSFET & HSide Crnt Sense RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。