- 您现在的位置：买卖IC网 > PDF目录14261 > MAX16997AAUA/V+ (Maxim Integrated Products)IC TIMER WATCHDOG 8UMAX PDF资料下载
参数资料
| 型号： | MAX16997AAUA/V+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC TIMER WATCHDOG 8UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | 监视器电路 |
| 监视电压数目： | 1 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 可调节/可选择 |
| 电压 - 阀值： | 可调节/可选择 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 管件 |
High-Voltage Watchdog Timers with
Adjustable Timeout Delay
Pin Description
MAX16997A
1
2
3, 7
PIN
MAX16998A/B/D
1
—
—
NAME
IN
EN
N.C.
FUNCTION
Power-Supply Input. Bypass IN to GND with a 0.1μF capacitor.
High-Impedance Input to the Enable Comparator. Depending on the voltage level
at EN, the internal watchdog timer is turned on or off (see the EN Input section).
No Connection. Not internally connected.
Watchdog Timeout Adjustment Input. Connect a capacitor between SWT and GND
4
4
SWT
to set the basic watchdog timeout period. Connect SWT to ground to disable the
watchdog timer function. See the Selecting the Watchdog Timeout Capacitor
section.
5
5
GND
Ground
Watchdog Input.
MAX16997A/MAX16998A (Timeout Watchdog): Two consecutive WDI falling
edges must occur at WDI within the watchdog timeout period or RESET asserts.
The watchdog timer clears when a falling edge occurs on WDI or whenever RESET
is asserted. ENABLE asserts if three consecutive watchdog timeout periods have
expired without a falling edge at WDI. WDI is a high-impedance input. Leaving
WDI unconnected will cause improper operation of the watchdog timer.
6
6
WDI
MAX16998B/D (Window Watchdog): WDI falling transitions within periods shorter
than the closed window width or longer than the basic watchdog timeout period
force RESET to assert low for the reset timeout period. The watchdog timer begins
to count after RESET is deasserted. The watchdog timer clears when a WDI falling
edge occurs or whenever RESET is asserted. ENABLE asserts if three consecutive
watchdog timeout periods have expired without a falling edge at WDI. WDI is a
high-impedance input. Leaving WDI unconnected will cause improper operation of
the watchdog timer.
Open-Drain Enable Output. ENABLE asserts when three consecutive WDI faults
occur. ENABLE remains low until three consecutive good WDI falling edges occur.
8
8
ENABLE
ENABLE does not assert if the voltage at RESETIN (EN) is below its threshold.
These devices are guaranteed to be in correct ENABLE output logic state when
V IN remains greater than 1.1V.
Reset Input. High-impedance input to the reset comparator. When V RESETIN falls
below 1.235V, RESET asserts. RESET remains asserted as long as V RESETIN is low
—
2
RESETIN
and for the reset timeout period after RESETIN goes high. Connect V RESETIN to the
center point of an external resistive divider to set the threshold for the externally
monitored voltage. Connect RESETIN to a defined voltage logic-level.
Reset Timeout Adjustment Input. Connect a capacitor between SRT and GND to
—
3
SRT
set the reset timeout period. See the Selecting the Reset Timeout Capacitor
section.
Open-Drain Reset Output. RESET asserts whenever RESETIN drops below the
selected reset threshold voltage (V PON ). RESET remains low for the reset timeout
—
7
RESET
period after all reset conditions are removed, and then goes high. RESET asserts
for a period of t RESET whenever a WDI fault occurs. Connect RESET to a pullup
resistor connected to a voltage higher than 2.5V (typ).
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| ECM10DTBT-S664 | CONN EDGECARD 20POS R/A .156 |
| LNY2V182MSEF | CAP ALUM 1800UF 350V 20% SCREW |
| RBM08DTMN-S273 | CONN EDGECARD 16POS R/A .156 SLD |
| PSU16130A | CAP ALUM 161UF 330V QC TERM |
| LNC2G122MSEF | CAP ALUM 1200UF 400V 20% SCREW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX16998AAUA/V+ | 功能描述:监控电路 Watchdog Timer w/Adj Timeout Delay RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX16998AAUA/V+T | 功能描述:监控电路 Watchdog Timer w/Adj Timeout Delay RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX16998AAUA+ | 功能描述:监控电路 Watchdog Timer w/Adj Timeout Delay RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX16998AAUA+T | 功能描述:监控电路 Watchdog Timer w/Adj Timeout Delay RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX16998BAUA/V+ | 功能描述:监控电路 Watchdog Timer w/Adj Timeout Delay RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。