- 您现在的位置：买卖IC网 > PDF目录16246 > MAX17040G+T (Maxim Integrated Products)IC 2-WIRE FG W/MODEL GAUGE 8TDFN PDF资料下载
参数资料
| 型号： | MAX17040G+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/13页 |
| 文件大小： | 0K |
| 描述： | IC 2-WIRE FG W/MODEL GAUGE 8TDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 系列： | ModelGauge™ |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 2.5 V ~ 4.5 V |
| 工作温度： | -20°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 供应商设备封装： | 8-TDFN-EP（2x3） |
| 包装： | 标准包装 |
| 其它名称： | MAX17040G+TDKR |
MAX17040/MAX17041
Compact, Low-Cost 1S/2S Fuel Gauges
Table 5. 2-Wire Protocol Key
KEY
S
SAddr
MAddr
Data
A
N
DESCRIPTION
START bit
Slave address (7 bit)
Memory address byte
Data byte written by master
Acknowledge bit—master
No acknowledge—master
KEY
Sr
W
P
Data
A
N
DESCRIPTION
Repeated START
R/W bit = 0
STOP bit
Data byte returned by slave
Acknowledge bit—slave
No acknowledge—slave
Basic Transaction Formats
Write: S. SAddr W. A . MAddr. A . Data0. A . Data1. A . P
A write transaction transfers 2 or more data bytes to the
MAX17040/MAX17041. The data transfer begins at the
memory address supplied in the MAddr byte. Control of
the SDA signal is retained by the master throughout the
transaction, except for the acknowledge cycles:
Read: S. SAddr W. A . MAddr. A . Sr. SAddr R. A . Data0 . A. Data1 . N. P
The MSB of the data to be stored at address MAddr
can be written immediately after the MAddr byte is
acknowledged. Because the address is automatically
incremented after the LSB of each byte is received by
the MAX17040/MAX17041, the MSB of the data at
address MAddr + 1 can be written immediately after
the acknowledgment of the data at address MAddr. If
the bus master continues an autoincremented write
transaction beyond address 4Fh, the MAX17040/
MAX17041 ignore the data. A valid write must include
both register bytes. Data is also ignored on writes to
Write Portion
Read Portion
read-only addresses. Incomplete bytes and bytes that
are not acknowledged by the MAX17040/MAX17041
A read transaction transfers 2 or more bytes from the
MAX17040/MAX17041. Read transactions are com-
posed of two parts, a write portion followed by a read
portion, and are therefore inherently longer than a write
transaction. The write portion communicates the starting
point for the read operation. The read portion follows
immediately, beginning with a Repeated START, Slave
Address with R/W set to a 1. Control of SDA is assumed
by the MAX17040/MAX17041, beginning with the Slave
Address Acknowledge cycle. Control of the SDA signal
is retained by the MAX17040/MAX17041 throughout the
transaction, except for the acknowledge cycles. The
master indicates the end of a read transaction by
responding to the last byte it requires with a no
acknowledge. This signals the MAX17040/MAX17041
that control of SDA is to remain with the master following
the acknowledge clock.
Write Data Protocol
The write data protocol is used to write to register to the
MAX17040/MAX17041 starting at memory address
MAddr. Data0 represents the data written to MAddr,
Data1 represents the data written to MAddr + 1, and
DataN represents the last data byte, written to MAddr +
N. The master indicates the end of a write transaction
by sending a STOP or Repeated START after receiving
the last Acknowledge bit:
SAddr W. A . MAddr. A . Data0. A . Data1. A... DataN. A
Maxim Integrated
are not written to memory.
Read Data Protocol
The read data protocol is used to read to register from
the MAX17040/MAX17041 starting at the memory
address specified by MAddr. Both register bytes must
be read in the same transaction for the register data to
be valid. Data0 represents the data byte in memory
location MAddr, Data1 represents the data from MAddr
+ 1, and DataN represents the last byte read by the
master:
S. SAddr W. A . MAddr. A . Sr. SAddr R. A .
Data0 . A. Data1. A... DataN . N. P
Data is returned beginning with the MSB of the data in
MAddr. Because the address is automatically incre-
mented after the LSB of each byte is returned, the MSB
of the data at address MAddr + 1 is available to the
host immediately after the acknowledgment of the data
at address MAddr. If the bus master continues to read
beyond address FFh, the MAX17040/MAX17041 output
data values of FFh. Addresses labeled Reserved in the
memory map return undefined data. The bus master
terminates the read transaction at any byte boundary
by issuing a no acknowledge followed by a STOP or
Repeated START.
11
相关PDF资料 |
PDF描述 |
|---|---|
| MAX803SQ308T1G | IC MPU RESET MON 3.08V SOT-323 |
| EET-UQ2V681DA | CAP ALUM 680UF 350V 20% SNAP |
| MAX803SQ463T1G | IC MPU RESET MON 4.63V SOT-323 |
| MAX809SN293D1T1G | IC MPU RESET MON 2.93V SOT-23 |
| EET-UQ2W391KA | CAP ALUM 390UF 450V 20% SNAP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX17040K | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17040X+T10 | 功能描述:电池管理 1S/2S Fuel Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17040X+U | 功能描述:电池管理 1S/2S Fuel Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17041EVKIT+ | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17041G+T | 功能描述:电池管理 1S/2S Fuel Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。