- 您现在的位置：买卖IC网 > PDF目录180478 > MAX1758EAI+ (MAXIM INTEGRATED PRODUCTS INC) Stand-Alone, Switch-Mode Li+ Battery Charger with Internal 28V Switch PDF资料下载
参数资料
| 型号： | MAX1758EAI+ |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | 电源管理 |
| 英文描述： | Stand-Alone, Switch-Mode Li+ Battery Charger with Internal 28V Switch |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO28 |
| 封装： | 5.30 MM, 0.65 MM PITCH, SSOP-28 |
| 文件页数： | 16/17页 |
| 文件大小： | 224K |
| 代理商： | MAX1758EAI+ |
MAX1758
Stand-Alone, Switch-Mode
Li+ Battery Charger with Internal 28V Switch
8
_______________________________________________________________________________________
NAME
FUNCTION
1
VL
Chip Power Supply. Output of the 5.4V linear regulator from DCIN. Bypass VL to GND with 2.2F or larger
ceramic capacitor.
2
ISETIN
Input Current Limit Adjust. Use a voltage-divider to set the voltage between 0 and VREF. See Input Current
Regulator section.
PIN
3
ISETOUT
Battery Charging Current Adjust. Use a voltage-divider to set the voltage between 0 and VREF. See
Charging Current Regulator section.
4
THM
Thermistor Input. Connect a thermistor from THM to GND to set qualification temperature range. If unused,
connect a 10k
resistor from THM to GND. See Thermistor section.
8
BATT
Battery Voltage-Sense Input and Current-Sense Negative Input
7
VADJ
Voltage Adjustment. Use a voltage-divider to set the voltage between 0 and VREF to adjust the battery reg-
ulation voltage by ±5%. See Battery Regulation Voltage section.
6
GND
Analog Ground
5
REF
4.2V Reference Voltage Output. Bypass REF to GND with 1F or larger ceramic capacitor.
13
TIMER2
Timer2 Adjustment. Connect a capacitor from TIMER2 to GND to set the fast-charge time. See Timers section.
12
TIMER1
Timer1 Adjustment. Connect a capacitor from TIMER1 to GND to set the prequalification, full-charge, and
top-off times. See Timers section.
11
CELL
Cell-Count Programming Input. Connect CELL to GND, REF, or VL to set 1, 3, or 4 cells, or leave uncon-
nected to set 2 cells.
9, 10
HSD
High-Side Drain. This is the drain of the internal high-side FET. See Figure 3.
Pin Description
14
FAULT
Charge Fault Indicator. Open-drain output pulls low when charging terminates abnormally. See Table 1.
15
FASTCHG
Fast-Charge Indicator. Open-drain output pulls low when charging with constant current.
16
FULLCHG
Full-Charge Indicator. Open-drain output pulls low when charging with constant voltage in full-charge
state.
17
SHDN
Shutdown Input. Drive SHDN low to disable charging. Connect SHDN to VL for normal operation.
18
PGND
Power Ground. Current from the low-side power MOSFET switch source flows through PGND.
19, 20
LX
Power Inductor Switching Node and High-Side Power MOSFET Source
21
CS
Battery Current-Sense Positive Input. Connects to internal 0.1
resistor between BATT and CS.
22
BST
High-Side MOSFET Gate Drive Bias. Connect a 0.1F capacitor from BST to LX.
23
CCS
Charger Source Current Regulation Loop Compensation Point. See Compensation section.
24
CCI
Battery Charge Current Regulation Loop Compensation Point. See Compensation section.
25
CCV
Voltage Regulation Loop Compensation Point. See Compensation section.
26
CSSN
Source Current-Sense Negative Input. See Input Current Regulator section.
27
CSSP
Source Current-Sense Positive Input. See Input Current Regulator section.
28
DCIN
Power-Supply Input. DCIN is the input supply for the VL regulator. Bypass DCIN to GND with a 0.1F or
greater capacitor. See Detailed Description.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX182AFWI | 4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO28 |
| MAX182AMJ | 4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP28 |
| MAX18MVBD5.000MHZ | TCVCXO, CLOCK, 5 MHz, TTL OUTPUT |
| MAX19542EGK | 1-CH 12-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, QCC68 |
| MAX19996ETP+T | SiGe, High-Linearity, High-Gain, 2000MHz to 3000MHz Downconversion Mixer with LO Buffer; ; Temperature Range: -40°C to +85°C |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1758EAI+ | 功能描述:电池管理 Li+ Battery Charger w/28V Switch RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX1758EAI+T | 功能描述:电池管理 Li+ Battery Charger w/28V Switch RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX1758EAI-T | 功能描述:电池管理 Li+ Battery Charger w/28V Switch RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX1758EVKIT | 功能描述:电池管理 Evaluation Kit for the MAX1757 MAX1758 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17595ATE+ | 功能描述:电流型 PWM 控制器 AC/DC-DC/DC Peak Current-Mode Cnvrtr RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
发布紧急采购，3分钟左右您将得到回复。