- 您现在的位置：买卖IC网 > PDF目录1840 > MAX1798EGP+T (Maxim Integrated Products)IC POWER SUPPLY CDMA 20-QFN PDF资料下载
参数资料
| 型号： | MAX1798EGP+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 17/19页 |
| 文件大小： | 0K |
| 描述： | IC POWER SUPPLY CDMA 20-QFN |
| 标准包装： | 2,500 |
| 应用： | 手机，CDMA 手持话机 |
| 电流 - 电源： | 367µA |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-QFN 裸露焊盘 |
| 供应商设备封装： | 28-QFN/MLP 裸露焊盘（5x5） |
| 包装： | 带卷 (TR) |
CDMA Cellular/PCS System
Power Supplies
Applications Information
Capacitor Selection and
Regulator Stability
Use a 10μF low-ESR ceramic capacitor on the
MAX1798/MAX1798A/MAX1799/MAX1799A’s input if all
the supply inputs are connected together. Larger input
capacitance and lower ESR provide better supply noise
rejection and line-transient response. If IN1, IN2/3, and
IN4/5 are connected to different supply voltages,
bypass each input with a 4.7μF low-ESR ceramic
capacitor.
A minimum 4.7μF low-ESR ceramic capacitor is recom-
mended on OUT1, and a minimum 2.2μF low-ESR
ceramic capacitor is recommended on OUT2–5. The
MAX1798/MAX1798A/MAX1799/MAX1799A are stable
with output capacitors in the ESR range of 10m ? to 1 ? .
Use larger capacitors to reduce noise and improve
load-transient response, stability, and power-supply
rejection.
Note that some ceramic dielectrics exhibit large capac-
itance and ESR variation with temperature. With
dielectrics such as Z5U and Y5V, it may be necessary
to use a minimum 4.7μF on OUT2–5 to ensure stability
at temperatures below -10°C. With X7R or X5R
dielectrics, 2.2μF should be sufficient at all operating
temperatures. Tantalum capacitors may cause instabili-
ty with the MAX1798/MAX1798A/MAX1799/MAX1799A
and are not recommended for this application.
Use a 0.01μF bypass capacitor at BP for low output-
voltage noise. Increasing the capacitance will slightly
When operating from sources other than batteries,
improved supply noise rejection and transient response
can be achieved by increasing the values of the input
and output bypass capacitors and through passive fil-
tering techniques. The Typical Operating Character-
istics show the MAX1798/MAX1798A/MAX1799/
MAX1799A line- and load-transient responses.
Load-Transient Considerations
The MAX1798/MAX1798A/MAX1799/MAX1799A load-
transient response graphs (see Typical Operating
Characteristics) show three components of the output
response: the output capacitor’s ESR spike, the regula-
tor’s transient settling response, and the DC shift due to
the LDO’s load regulation. Increasing the output capaci-
tor’s value and decreasing the ESR reduce the over-
shoot.
Dropout Voltage
A regulator’s minimum input-output voltage differential
(dropout voltage) determines the lowest usable supply
voltage. In battery-powered systems, this determines
the useful end-of-life battery voltage. Because the
MAX1798/MAX1798A/MAX1799/MAX1799A use P-
channel MOSFET pass transistors, their dropout volt-
age is a function of drain-to-source on-resistance
(R DS(ON) ) multiplied by the load current. See the
Dropout Voltage (OUT1) vs. Load Current graph in the
Typical Operating Characteristics.
Ordering Information (continued)
decrease the output noise but will increase the startup
time. Values above 0.1μF provide no performance
advantage and are not recommended.
Line-Transient Considerations
The MAX1798/MAX1798A/MAX1799/MAX1799A are
designed to deliver low dropout voltages and low qui-
escent currents in battery-powered systems. Power-
PART
MAX1799 ETP+
MAX1799EUP+
MAX1799A ETP+
MAX1799AEUP+
TEMP
RANGE
-40 ° C to +85 ° C
-40 ° C to +85 ° C
-40 ° C to +85 ° C
-40 ° C to +85 ° C
PIN-
PACKAGE
20 TQFN
20 TSSOP-EP
20 TQFN
20 TSSOP-EP
INTER-
FACE
I 2 C
I 2 C
I 2 C
I 2 C
supply rejection is >60dB at low frequencies and rolls
off above 10kHz. See the Power-Supply Rejection Ratio
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
(PSRR) vs. Frequency graph in the Typical Operating
Characteristics.
Chip Information
PROCESS: BiCMOS
______________________________________________________________________________________
17
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1801EKA+T | IC CNTRLR DC-DC SOT23-8 |
| MAX1802EHJ+ | IC PWR SPLY STEP DOWN 32-TQFP |
| MAX1804EUB+ | IC FEEDBACK INTERGRATOR 10UMAX |
| MAX1806EUA18+ | IC REG LDO 1.8V/ADJ .5A 8-UMAX |
| MAX1809ETI+ | IC DDR TERMINATION 28-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1798EUP | 功能描述:PMIC 解决方案 CDMA Cellular/PCS System Power Supply RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel |
| MAX1798EUP+ | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX1798EUP-T | 功能描述:PMIC 解决方案 CDMA Cellular/PCS System Power Supply RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel |
| MAX1799AEGP | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX1799AEUP | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。