- 您现在的位置：买卖IC网 > PDF目录20718 > MAX1985ETP+ (Maxim Integrated)IC LED DRVR WHITE BCKLGT 20-TQFN PDF资料下载
参数资料
| 型号： | MAX1985ETP+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 14/17页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR WHITE BCKLGT 20-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 75 |
| 拓扑： | PWM，升压（升压） |
| 输出数： | 6 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 800kHz ~ 1.2MHz |
| 电源电压： | 2.7 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WFQFN 裸露焊盘 |
| 供应商设备封装： | 20-TQFN-EP |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 85°C |
Ultra-High-Efficiency White
LED Drivers
LED Selection
The MAX1984/MAX1985/MAX1986 provide a control
input (SEL) to selectively turn on one subset, the other
subset, or all of the LEDs. SEL is a three-level logic
input that can be connected to logic low, logic high, or
left unconnected. Table 5 is the truth table.
LED Test Mode
Connecting SETI to ground enables the LED test mode.
In this mode, the LED current is set to 0.5mA and
DC-to-DC switching is inhibited. OUT is powered from
IN through an internal silicon diode.
Forcing 0.5mA through the LED is a simple way to
determine whether the diode has suffered any ESD
damage. LEDs that do not light in this mode usually
have suffered ESD or other damage. The dimming con-
trol inputs are ignored in the test mode.
Table 3. 3-Bit Parallel Control Truth Table
Shutdown
As soon as the input voltage rises above the UVLO
threshold and the internal reference is ready, the step-
up regulator starts unless the device is in shutdown. If a
2-bit or 3-bit parallel control is used, the MAX1984/
MAX1985/MAX1986 enter shutdown mode when BITA,
BITB, and BITC are logic low. The parts come out of
shutdown if at least 1 bit is logic high. If DPWM control
is used, the parts enter shutdown mode when the duty
cycle of BITA is less than 5% (typ) and BITC is logic
low. If analog control is used, the parts enter shutdown
when the voltages on both BITA and BITB are logic low.
Overvoltage Protection
Output OVP prevents the internal switches from being
damaged if all LEDs are open. If the output voltage
rises above OUT OVP rising threshold, the
MAX1984/MAX1985/MAX1986 turn off the step-up reg-
ulator. Once the output voltage falls below OVP falling
threshold, the step-up regulator turns on again.
BITA
0
0
0
0
1
1
1
1
BITB
0
0
1
1
0
0
1
1
BITC
0
1
0
1
0
1
0
1
BRIGHTNESS (%)
0
14.3
26.6
42.9
57.1
71.4
85.7
100
COMMENTS
Shutdown
Minimum current
—
—
—
—
—
Full-scale current
set by SETI
Applications Information
Inductor Selection
The MAX1984/MAX1985/MAX1986 ’ s 1MHz switching
frequency allows the use of low-profile surface-mount
inductors. The MAX1984 works well with a 10μH induc-
tor, the MAX1985 works well with a 15μH inductor, and
the MAX1986 works well with a 22μH inductor. The
inductor saturation current rating should be higher than
the N-channel switch current limit. For high efficiency,
choose an inductor made of high-frequency core mate-
rial to reduce core losses. Using a shielded inductor
reduces radiated EMI.
Table 4. 2-Bit Parallel Control Truth Table
Output Capacitor Selection
The output capacitor affects the circuit ’ s stability and
BITA
BITB BITC
BRIGHTNESS (%)
COMMENTS
output-voltage ripple. The MAX1984 works well with a
0
0
1
1
0
1
0
1
0
0
0
0
0
33.3
66.7
100
Shutdown
Minimum current
—
Full-scale current
set by SETI
4.7μF ceramic output capacitor, the MAX1985 works
well with a 3.3μF ceramic output capacitor, and the
MAX1986 works well with a 2.2μF ceramic output
capacitor. Always use capacitors with working voltage
ratings higher than the output OVP rising threshold
(5.5V max).
Table 5. SEL Control Truth Table
SEL
Low (V SEL < 0.4V)
Mid (SEL unconnected
or 0.5V < V SEL < 1.8V)
High (V SEL > 2.05V)
MAX1984
LED1 to
LED5 ON
LED6 to
LED8 ON
MAX1985
LED1 to
LED4 ON
LED5 to
LED6 ON
All LEDs ON
MAX1986
LED1 to
LED3 ON
LED4 ON
14
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J33-CX-F2 | CONVERTER MOD DC/DC 24V 75W |
| NCV612SQ15T1G | IC REG LDO 1.5V .2A SOT-353 |
| TPSV477K006R0040 | CAP TANT 470UF 6.3V 10% 2924 |
| HSM44DSEN | CONN EDGECARD 88POS .156 EYELET |
| ECM08DSXN | CONN EDGECARD 16POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1985ETP+ | 功能描述:LED照明驱动器 High-Efficiency White LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX1985ETP+T | 功能描述:LED照明驱动器 High-Efficiency White LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX1985ETP-T | 功能描述:LED照明驱动器 RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX1985EVKIT | 功能描述:电源管理IC开发工具 MAX1985 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX1986ETE | 功能描述:LED照明驱动器 RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。